Login/Register
Shopping Cart
OR
Simpson Strong-Tie CB46HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB46HDG base is installed during the pouring of the...
Simpson Strong-Tie CB46HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB46HDG base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Hot Dipped Galvanized Steel Base Material: 7 Ga Hot Dipped Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46HDG Information and Installation Instructions Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the...
Simpson Strong-Tie TA10Z Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA10Z angles are easily...
Simpson Strong-Tie TA10Z Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA10Z angles are easily installed with (7) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (Min) SDS25112 Screws - (3) Stringer, (4) Tread (Max) SDS25112 Screws - (4) Stringer, (3) Tread Dimensions: 10-1/4" Length x...
The Simpson Strong-Tie SUR26Z Skewed Right 2 x 6/8 joist hangers with ZMax® coating are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will...
The Simpson Strong-Tie SUR26Z Skewed Right 2 x 6/8 joist hangers with ZMax® coating are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. ZMax® coating provides additional corrosion protection when required. Material: 16 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside...
Simpson Strong-Tie MSTA18 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x...
Simpson Strong-Tie MSTA18 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 18" (Length) Fasteners: (14) 10d Nails (14) SD9 x 1-1/2" Screws...
Simpson Strong-Tie LSTA36 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x...
Simpson Strong-Tie LSTA36 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a LSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 36" (Length) Fasteners: (24) 10d Nails (24) SD9 x 1-1/2" Screws...
Simpson Strong-Tie CCQ44-SDS2.5HDG Hot Dipped Galvanized Column Caps provide a high capacity connection between a 4x beam and a 4x post. CCQ44-SDS2.5HDG Column Caps should be used when the beam...
Simpson Strong-Tie CCQ44-SDS2.5HDG Hot Dipped Galvanized Column Caps provide a high capacity connection between a 4x beam and a 4x post. CCQ44-SDS2.5HDG Column Caps should be used when the beam extends through the post. Each CCQ44-SDS2.5HDG Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Hot Dipped Galvanized coating provides corrosion resistance when required. Material: 7 gauge Finish: Hot Dipped...
The Simpson Strong-Tie CJT6ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a...
The Simpson Strong-Tie CJT6ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT6ZL long (4-3/4") pins can be used with 5-1/8" Glulam Beams or 6x sawn lumber. Minimum Joist Size: Douglas Fir - 6 x 12 Glulam Beam - 5-1/8" x 12" Material: 12 Gauge Finish:...
Simpson Strong-Tie ITS1.81/16 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/16 installs 1-3/4" x 16" I-Joists faster and uses less nails than any other EWP top flange...
Simpson Strong-Tie ITS1.81/16 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/16 installs 1-3/4" x 16" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the joist...
Simpson Strong-Tie IUS2.06/9.5 is used to install 2" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS2.06/9.5 is used to install 2" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) .148 x 3" Nails (Face) IUS2.06/9.5 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
Simpson Strong Tie HGUS28-3 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS28-3 hangers are...
Simpson Strong Tie HGUS28-3 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS28-3 hangers are designed to accept three 2 x 8 truss plates or joists with a minimum heel height of 6-13/16". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 4-15/16" (Wide) x 7-1/4" (Height) x 4" (Seat Depth) Fastener Options: (36) 16d Nails (Header) (12) 16d Nails (Joist)...Shorter Nails Not Allowed...
Simpson Strong Tie HUCQ210-3-SDS 4-5/8" Wide Triple 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-3-SDS hangers with concealed...
Simpson Strong Tie HUCQ210-3-SDS 4-5/8" Wide Triple 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-3-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 4-5/8" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x 2-1/2" Screws...
Simpson Strong Tie U26-2 Double 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U26-2 Double 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 5" (Height) x 2" (Seat Depth) Fastener Options: (8) .162" x 3-1/2" 16d Nails (Header) (4) .148" x 3" 10d Nails (Joist) U26-2 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
Simpson Strong-Tie CCO5 1/4 End Column Caps with no post straps provides a high capacity connection between a 5-1/8" wide beam and a steel post. The CCO5 1/4 Column Caps comes with no coating to...
Simpson Strong-Tie CCO5 1/4 End Column Caps with no post straps provides a high capacity connection between a 5-1/8" wide beam and a steel post. The CCO5 1/4 Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 5-1/8"...
Simpson Strong Tie LUS26Z ZMax® 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...
Simpson Strong Tie LUS26Z ZMax® 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26Z hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 1-3/4" (Seat...
The Simpson Strong-Tie BC60Z ZMax® Half Base is an economical way to attach a nominal 6 x 6 post to a wood subfloor or bottom plate. ZMax Corrosion Protection provides additional resistance to...
The Simpson Strong-Tie BC60Z ZMax® Half Base is an economical way to attach a nominal 6 x 6 post to a wood subfloor or bottom plate. ZMax Corrosion Protection provides additional resistance to corrosive conditions. Base Material: 18 Gauge Dimensions: (W) 5-1/2" x (L) 5-1/2" x (H) 3" Finish: ZMax G-185 Coating Fastener Options: (10) 16d Nails BC60Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM...
The Simpson Strong-Tie H2.5AZ Ties with ZMax® Corrosion Protection can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate...
The Simpson Strong-Tie H2.5AZ Ties with ZMax® Corrosion Protection can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate to the rafter or truss. This clip accepts 8d .131" x 1-1/2" joist nails or longer. You can also substitute the Simpson SD #9 x 1-1/2" Structural Screw. Material: 18 Gauge Finish: ZMax® G-185 Coating Fasteners: (10) 8d x 1-1/2" Nails (10) SD9 x 1-1/2" Screws H2.5AZ Information and Installation...
The Simpson Strong-Tie LS90 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time....
The Simpson Strong-Tie LS90 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS90 Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Standard G90 Zinc Galvanizing Length: 7-7/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (12) 10d x 1-1/2" Nails LS90 Information and Installation Instructions...
Simpson Strong-Tie PDPAWL-200 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin...
Simpson Strong-Tie PDPAWL-200 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. Length: 2" Head Diameter: .300" Shank Diameter: .157" Coating: Standard G90 Zinc PDPAWL Series Fasteners Tension and Shear Loads in Normal Weight Concrete PAT Fastener MSDS Standard G90 Zinc...
Head is Painted Dark Brown! The Simpson S11A237KJB 2-3/8" X .120" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head is painted dark brown to match siding or...
Head is Painted Dark Brown! The Simpson S11A237KJB 2-3/8" X .120" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head is painted dark brown to match siding or decking when applicable. The countersunk casing head with a checker pattern on the head helps the nail blend with the wood grain. The annular ring shank increases pull-out resistance thus decreasing chances of the nails backing out over time. Type 304 stainless steel Countersunk casing head Ring...
Simpson Strong-Tie PBS66HDG Hot Dipped Galvanized Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab or pier. The 1" standoff keeps the post off the concrete which...
Simpson Strong-Tie PBS66HDG Hot Dipped Galvanized Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab or pier. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Hot dipped galvanizing provides and additional layer of protection from deterioration due to weather. Finish: Hot Dipped Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS66HDG...
The Simpson Strong-Tie Quik Drive® WSV3S #9 x 3" Screws are ideal for screwing wood-to-wood when their is little concern about corrosion of the fasteners. The most common use of these screws is...
The Simpson Strong-Tie Quik Drive® WSV3S #9 x 3" Screws are ideal for screwing wood-to-wood when their is little concern about corrosion of the fasteners. The most common use of these screws is for subfloor applications because the screw creates a very tight connection between the plywood and joist. Using a StrongDrive® Automatic Tool with a 20" extension saves time and labor thus saving you money. Redesigned tip and thread pattern provides easy starts and up to 25% less torque while...
Head is Painted Tan! The Simpson Strong-Tie 2-1/4" x .092" Tan Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from...
Head is Painted Tan! The Simpson Strong-Tie 2-1/4" x .092" Tan Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Tan Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from sunlight and accepts...
The Simpson Strong-Tie WT-12 Wedge Form Ties are designed for low foundation wall applications with a 12" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and...
The Simpson Strong-Tie WT-12 Wedge Form Ties are designed for low foundation wall applications with a 12" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 12". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Explanation of "Stock" Availability Term Stock...
Simpson Strong-Tie Avant Outdoor Accents® flat APVT6 T-Straps bring decorative appeal and lateral strength to any outdoor living space like patio covers, gazebos and more. The APVT6 T-Straps...
Simpson Strong-Tie Avant Outdoor Accents® flat APVT6 T-Straps bring decorative appeal and lateral strength to any outdoor living space like patio covers, gazebos and more. The APVT6 T-Straps provide reinforcement for a connection where two 6x or larger lumber pieces intersect at a 90-degree angle in the center of the beam. These straps are easily installed with Outdoor Accents structural screws and hex-head washers. Install with Outdoor Accents® structural screws and hex-head washer...