Simpson Strong-Tie

Simpson Strong-Tie HTU26 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26 hanger very versatile for various...

Simpson Strong-Tie HTU26 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26 hanger very versatile for various trusses. Additionally you can have the HTU26 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is 1/8" per ASTM...

The Simpson Strong-Tie SUL24 Skewed Left 2 x 4 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists...

The Simpson Strong-Tie SUL24 Skewed Left 2 x 4 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 4 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/2" (Height) x 1-1/8" (Outside Flange) x 1-1/4" (Inside Flange) Fastener Options : (4) .162 x 3-1/2" 16d Nails (Face) (4) .148 x 1-1/2" 10d...

The Simpson Strong-Drive® SDS25112 1/4" x 1-1/2" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25112 screw...

The Simpson Strong-Drive® SDS25112 1/4" x 1-1/2" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25112 screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 1-1/2" Thread Length: 1" Serrated Shank Diameter: 1/4" Point Type: Type 17 Point Drive...

The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. Simpson Strong-Drive SD9112 #9 x 1-1/2"...

The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. Simpson Strong-Drive SD9112 #9 x 1-1/2" structural connector screws are approved to replace nails in certain Simpson Strong-Tie Connectors. The advantages of using screws can be ease of installation in tight spots and less vibration when installing connectors during remodel projects. The shank of the SD9112 screws are designed to easily fit in...

The Simpson Strong-Tie® Strong-Drive® SDWS22300DB .220" x 3" wood screw is specifically designed for structural wood-to-wood applications and is also ideal for a wide variety of projects...

The Simpson Strong-Tie® Strong-Drive® SDWS22300DB .220" x 3" wood screw is specifically designed for structural wood-to-wood applications and is also ideal for a wide variety of projects where a high-strength attachment is needed. The 0.220" diameter of the SDWS22300DB 3" wood screw requires less torque to install than comparable fasteners, making it easier to drive. The Double-Barrier Coating corrosion-resistant coating makes it suitable for many interior and exterior applications....

The Simpson Strong-Tie® Strong-Drive® SDWH19300DB 3" screw is ideal for structural and general-purpose fastening applications where a hex-head drive is preferred. This 0.195" diameter...

The Simpson Strong-Tie® Strong-Drive® SDWH19300DB 3" screw is ideal for structural and general-purpose fastening applications where a hex-head drive is preferred. This 0.195" diameter fastener requires less torque to install than comparable fasteners, making it easier to drive; while the corrosion-resistant coating makes it suitable for many interior and exterior applications. The large hex washer head of the SDWH19300DB 3" screw creates an excellent bearing area for a secure...

With the Simpson Strong-Tie SDWC15450-KT 4-1/2" Structural Screws you will now have the flexibility to provide an approved connection even after the exterior shear wall has been installed. The labor...

With the Simpson Strong-Tie SDWC15450-KT 4-1/2" Structural Screws you will now have the flexibility to provide an approved connection even after the exterior shear wall has been installed. The labor savings installing the SDWC15450-KT 4-1/2" Structural Screws as opposed to installing traditional ties and straps will more than offset the costs of the fasteners. The 6-lobe drive using a T-30 bit reduces your chance of stripping out the screw, enabling a quick and secure installation. Fully...

The Simpson Strong-Tie LSCZ ZMax® adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while replacing...

The Simpson Strong-Tie LSCZ ZMax® adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair stringer pitches, the LSCZ connector is suitable for either solid or notched stringers. Replaces additional framing and toe-nailing. May be installed flush with the top of the carrying member (typically suitable for 2x10 or 2x12 header / rim board) or...

The Simpson Strong-Tie DSC2L-SDS3 Left Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are...

The Simpson Strong-Tie DSC2L-SDS3 Left Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 16" (Length) x 3" (Flanges) Included Fasteners: (20) SDS 1/4" x 3" DSC2L-SDS3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

The Simpson Strong Tie GH46-6 Girder Hangers is used to connect a 4 x 6 girder to a 6" foundation wall using 2x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if...

The Simpson Strong Tie GH46-6 Girder Hangers is used to connect a 4 x 6 girder to a 6" foundation wall using 2x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 3-7/8" (H) x 6-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-6 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint...

The S/HDU4 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU4 holdown...

The S/HDU4 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU4 holdown combines performance with ease of installation using #14 screws self-drilling tapping screws thus saving time and labor.. The pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load. Foundation Anchor Diameter: 5/8" Fasteners (Not Included): (6) #14 Screws...

The Simpson Strong-Tie EPC4Z post cap is designed with the post and beam flanges in-line so that the EPC4Z end post cap can accommodate several 4x post sizes as well as double 2x4 studs. The EPC4Z...

The Simpson Strong-Tie EPC4Z post cap is designed with the post and beam flanges in-line so that the EPC4Z end post cap can accommodate several 4x post sizes as well as double 2x4 studs. The EPC4Z now uses easier-to-install 10d common nails saving you both time and labor. An alternate choice of fasteners is Strong-Drive® #9x1 1/2" SD Connector screws. Zmax® finish is standard to meet exposure conditions in many environments. Please Note: This cap may be special ordered in a rough...

The Simpson Strong-Tie CBT2Z Concealed Beam Tie combines structural strength with invisibility for applications that call for concealed joinery rather than standard beam-to-post connections. Whether...

The Simpson Strong-Tie CBT2Z Concealed Beam Tie combines structural strength with invisibility for applications that call for concealed joinery rather than standard beam-to-post connections. Whether you’re designing for a custom indoor or outdoor living space, the tubular shape of the CBTZ allows an easy-to-install beam-to-post connection using common tools. The CBT2Z is designed to connect beams and posts of a variety of sizes. The CBT2Z accommodates a minimum 4x4 post and 4x6 beam using four...

The Simpson Strong-Tie CPT44Z concealed 4 x 4 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the...

The Simpson Strong-Tie CPT44Z concealed 4 x 4 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. Each base includes (3) 1/2" x 2-3/4" mechanical galvanized dowels. If 1/2" machine bolts are substituted it is recommended they are hot dipped galvanized. The CPT44Z is tested and load-rated...

Bright Checkered Nail Head The Simpson Strong-Tie S13A225SNC 2-1/4" x .092" Non-Painted Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in...

Bright Checkered Nail Head The Simpson Strong-Tie S13A225SNC 2-1/4" x .092" Non-Painted Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Bright Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces...

The Simpson Strong-Tie 1-3/4" x 9-1/2" MIT9.5 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...

The Simpson Strong-Tie 1-3/4" x 9-1/2" MIT9.5 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...

Simpson Strong Tie face mount HU1.81/5 Composite Lumber Hanger is designed for hanging 1-3/4" x 5-1/2" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load...

Simpson Strong Tie face mount HU1.81/5 Composite Lumber Hanger is designed for hanging 1-3/4" x 5-1/2" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load value. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 1-13/16" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) Fastener Options: (12) 16d Nails (Header-Min) (4) 10d Nails (Joist-Min) (16) 16d Nails (Header-Max) (6) 10d Nails (Joist-Max) HU1.81/5 Information and Installation...

The Simpson Strong-Tie DSVT212R5LB #10 x 2-1/2" Deck Drive™ Tan Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and...

The Simpson Strong-Tie DSVT212R5LB #10 x 2-1/2" Deck Drive™ Tan Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today’s wood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber. Also DSV screws are available in collated strips for use in the Quik Drive® auto-feed screw driving...

The Simpson Strong-Tie LSSJ26LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes...

The Simpson Strong-Tie LSSJ26LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ26LZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

The Simpson Strong-Tie EDT22S Manual Dispensing Tool is all metal, making it durable to handle 22 oz epoxy application every day without fail. This heavy duty tool is engineered for high-volume,...

The Simpson Strong-Tie EDT22S Manual Dispensing Tool is all metal, making it durable to handle 22 oz epoxy application every day without fail. This heavy duty tool is engineered for high-volume, continuous use. The EDT22S can be easily converted from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridges when required. Please Note: The EDT22S Tool can also be modified to dispense Simpson AT-XP13 12.5oz. ACRYLIC-TIE Adhesive. Heavy duty construction prevents bent push rods...

The new patent-pending Simpson Strong-Tie® MPB44Z is the first post base specifically designed to provide moment resistance for 4 X 4 columns or posts. An innovative overlapping sleeve design...

The new patent-pending Simpson Strong-Tie® MPB44Z is the first post base specifically designed to provide moment resistance for 4 X 4 columns or posts. An innovative overlapping sleeve design encapsulates the post, helping to resist rotation around its base. The MPB44Z is ideal for outdoor structures, such as carports, fences and decks. Built-in standoff tabs provide the required 1" standoff to resist decay of the post while eliminating multiple parts and assembly. Additionally, the MPB44Z...

Simpson Strong-Tie Outdoor Accents® APA21 angles tie together beams, rafters and more. The APA21 angle makes structural connections between beams and posts much more visually appealing. These...

Simpson Strong-Tie Outdoor Accents® APA21 angles tie together beams, rafters and more. The APA21 angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Install with Outdoor Accents® structural screws and hex-head washer (sold separately) for a decorative look. Stronger than angled nailing or screw fastening alone for outdoor living or home...

Simpson Strong-Tie Mission Outdoor Accents® flat APL4 "L" straps bring decorative appeal and lateral strength to any outdoor living space like patio covers, gazebos and more. The APL4 "L"...

Simpson Strong-Tie Mission Outdoor Accents® flat APL4 "L" straps bring decorative appeal and lateral strength to any outdoor living space like patio covers, gazebos and more. The APL4 "L" provide reinforcement for a connection where two 4x or larger lumber pieces intersect at a 90-degree angle. These straps are easily installed with Outdoor Accents structural screws and hex-head washers. Install with Outdoor Accents® structural screws and hex-head washer (sold separately) for a...

The Simpson Strong-Tie APDJT2-4 Deck Joist Tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and...

The Simpson Strong-Tie APDJT2-4 Deck Joist Tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection. Designed to meet stringent building codes for seismic or high-wind events Install with Outdoor Accents® structural wood screws and hex-head washers (sold separately) for a decorative look Material: 12 Gauge Steel Coating: ZMax® galvanized with a...