Simpson Strong-Tie

Simpson Strong-Tie Mission Outdoor Accents® APB44R post bases secure a rough 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other...

Simpson Strong-Tie Mission Outdoor Accents® APB44R post bases secure a rough 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature decorative accents and provide Zmax® galvanization over a black powder coat for extra corrosion resistance. APB44R bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture. Designed to meet stringent building codes...

The Simpson Strong-Tie EDTA22P Pneumatic tool features an optional suitcase handle adapter for the ultimate in tool configuration and dispensing convenience. The suitcase option enables easier and...

The Simpson Strong-Tie EDTA22P Pneumatic tool features an optional suitcase handle adapter for the ultimate in tool configuration and dispensing convenience. The suitcase option enables easier and time-saving ground-level doweling. The heavy duty EDTA22P tool comes with a custom, blow-molded plastic carrying case. This tool uses SET22-N and SETXP22-N adhesives. Explanation of "Simpson Ships Direct" Availability Direct Shipments from Simpson Strong-Tie are products Simpson stocks in many of...

Simpson Strong Tie face mount HU2.1/9 I-Joist Hanger is designed for hanging 2-1/16" x 9-1/2" I Joist. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 2-1/8" (Wide) x 9-3/16"...

Simpson Strong Tie face mount HU2.1/9 I-Joist Hanger is designed for hanging 2-1/16" x 9-1/2" I Joist. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 2-1/8" (Wide) x 9-3/16" (Height) x 2-1/2" (Seat Depth) Fastener Options: (14) .162" x 3-1/2" Nails (Header) (6) .148" x 1-1/2" Nails (Joist) HU2.1/9 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

The Simpson Strong-Tie LSSJ26RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes...

The Simpson Strong-Tie LSSJ26RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ26RZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

The Simpson Strong-Tie 1-3/4" x 11-7/8" MIT11.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but...

The Simpson Strong-Tie 1-3/4" x 11-7/8" MIT11.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...

Head is Painted Dark Brown! The Simpson Strong-Tie 2-1/4" x .092" Dark Brown Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood...

Head is Painted Dark Brown! The Simpson Strong-Tie 2-1/4" x .092" Dark Brown Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Dark Brown Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from...

The Simpson Strong-Tie DSVR212R5LB #10 x 2-1/2" Deck Drive™ Red Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and...

The Simpson Strong-Tie DSVR212R5LB #10 x 2-1/2" Deck Drive™ Red Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today’s wood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber. Also DSV screws are available in collated strips for use in the Quik Drive® auto-feed screw driving...

The Simpson Strong-Tie CBT4Z Concealed Beam Tie combines structural strength with invisibility for applications that call for concealed joinery rather than standard beam-to-post connections. Whether...

The Simpson Strong-Tie CBT4Z Concealed Beam Tie combines structural strength with invisibility for applications that call for concealed joinery rather than standard beam-to-post connections. Whether you’re designing for a custom indoor or outdoor living space, the tubular shape of the CBTZ allows an easy-to-install beam-to-post connection using common tools. The CBT4Z is designed to connect beams and posts of a variety of sizes. The CBT4Z accommodates a minimum 6x6 post and 6x8 beam using six...

The Simpson Strong-Tie CPT66Z concealed 6 x 6 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the...

The Simpson Strong-Tie CPT66Z concealed 6 x 6 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. Each base includes (3) 1/2" x 4-3/4" mechanical galvanized dowels. If 1/2" machine bolts are substituted it is recommended they are hot dipped galvanized. The CPT66Z is tested and load-rated...

The Simpson Strong-Tie PC4Z Post Cap is designed with the post and beam flanges in-line so that the PC4Z center post cap can accommodate several 4x post sizes as well as double 2x4 studs. The PC4Z...

The Simpson Strong-Tie PC4Z Post Cap is designed with the post and beam flanges in-line so that the PC4Z center post cap can accommodate several 4x post sizes as well as double 2x4 studs. The PC4Z now uses easier-to-install 10d common nails saving you both time and labor. An alternate choice of fasteners is Strong-Drive® #9x1 1/2" SD Connector screws. Zmax® finish is standard to meet exposure conditions in many environments. Please Note: This cap may be special ordered in a rough...

Simpson Strong-Tie CNW5/8-5/8-OST coupling nuts are a tested and load rated method to join 5/8" Hot Dipped Galvanized threaded rod or anchor bolts to 5/8" standard rod extensions. The "witness"...

Simpson Strong-Tie CNW5/8-5/8-OST coupling nuts are a tested and load rated method to join 5/8" Hot Dipped Galvanized threaded rod or anchor bolts to 5/8" standard rod extensions. The "witness" holes in the nut provide a means to visually verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. CNW5/8-5/8-OST meet and exceed the capacity of corresponding ASTM A36 bolts and threaded rod. CNW5/8-5/8-OST Information and Data...

The Simpson Strong-Tie DSC2R-SDS3 Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that...

The Simpson Strong-Tie DSC2R-SDS3 Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 16" (Length) x 3" (Flanges) Included Fasteners: (20) SDS 1/4" x 3" DSC2R-SDS3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH46-6 Girder Hangers is used to connect a 4 x 6 girder to a 6" foundation wall using 2x sill plate. 1-1/2" clearance...

Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH46-6 Girder Hangers is used to connect a 4 x 6 girder to a 6" foundation wall using 2x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 3-7/8" (H) x 6-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-6 Information and Installation Instructions. Gray Paint Coating Information...

The Simpson Strong-Tie LSCSS Stainless Steel adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while...

The Simpson Strong-Tie LSCSS Stainless Steel adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair stringer pitches, the LSCZ connector is suitable for either solid or notched stringers. Replaces additional framing and toe-nailing. May be installed flush with the top of the carrying member (typically suitable for 2x10 or 2x12 header / rim...

The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. The Simpson Strong-Drive® SD9112SS SD...

The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. The Simpson Strong-Drive® SD9112SS SD Stainless-Steel Connector Screw is specifically designed to replace nails in certain Simpson Strong-Tie® stainless-steel connectors. The load-rated SD9112SS screw has been tested and approved for use in many popular Simpson Strong-Tie products. In certain applications screws are easier and more...

The Simpson Strong-Drive® SDS25112SS-R25 1/4" x 1-1/2" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood...

The Simpson Strong-Drive® SDS25112SS-R25 1/4" x 1-1/2" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25112SS-R25 stainless steel screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 1-1/2" Thread Length: 1" Serrated Shank...

The Simpson Strong-Tie SUR24 Skewed Right 2 x 4 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists...

The Simpson Strong-Tie SUR24 Skewed Right 2 x 4 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 4 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/2" (Height) x 1-1/8" (Outside Flange) x 1-1/4" (Inside Flange) Fastener Options : (4) .162" x 3-1/2" 16d Nails (Face) (4) .148" x 1-1/2"...

Simpson Strong-Tie HTU26-2 Double 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26-2 hanger very versatile for...

Simpson Strong-Tie HTU26-2 Double 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26-2 hanger very versatile for various trusses. Additionally you can have the HTU26-2 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is...

Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging...

Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS1.81/11.88 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...

Simpson Strong Tie HUCQ1.81/11-SDS 1-3/4" Wide x 11" Heavy Duty Composite Lumber Hangers come with the required SDS screws to reach the load values you require. HUCQ1.81/11-SDS hangers with...

Simpson Strong Tie HUCQ1.81/11-SDS 1-3/4" Wide x 11" Heavy Duty Composite Lumber Hangers come with the required SDS screws to reach the load values you require. HUCQ1.81/11-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-3/4" (Wide) x 11" (Height) x 3" (Seat Depth) Included Fasteners: (10) SDS 1/4" x 1-3/4" Screws (Header) (4) SDS 1/4" x 1-3/4"...

Simpson Strong Tie U24R Rough 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....

Simpson Strong Tie U24R Rough 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 3-5/8" (Height) x 2" (Seat Depth) Fastener Options: (4) .162" x 3-1/2" 16d Nails (Header) (2) .148" x 1-1/2" 10d Nails (Joist) U24R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...

Simpson Strong Tie HGUS26-2 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-2 hangers are...

Simpson Strong Tie HGUS26-2 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-2 hangers are designed to accept two 2 x 6 truss plates or joists with a minimum heel height of 4-5/16". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/16" (Wide) x 5-7/16" (Height) x 4" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails (Joist)...Shorter Nails Not Allowed...

Save by Purchasing a Quantity of 24 Boxes (1200 Pieces)! Simpson Strong Tie HUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points...

Save by Purchasing a Quantity of 24 Boxes (1200 Pieces)! Simpson Strong Tie HUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. HUS26 hangers are also approved for installation with SD10 x 2-1/2" Structural Screws. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson Strong-Tie ET3G22-N 22 oz. Dual Cartridge Epoxy Anchoring Adhesive is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete...

The Simpson Strong-Tie ET3G22-N 22 oz. Dual Cartridge Epoxy Anchoring Adhesive is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). Includes: Nozzle & Extension Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry Ideal for general doweling and threaded rod applications Two-year shelf life for unopened...