Simpson Strong-Tie

Simpson Strong-Tie Mission Outdoor Accents® APB44 post bases secure a 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported...

Simpson Strong-Tie Mission Outdoor Accents® APB44 post bases secure a 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature decorative accents and provide Zmax® galvanization over a black powder coat for extra corrosion resistance. APB44 bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture. Designed to meet stringent building codes for...

The Simpson Strong-Tie SD10112DBB #10 x 1-1/2" Outdoor Accents® connector screw reduces installation time by driving easily without pre-drilling. Designed for installation with the Outdoor...

The Simpson Strong-Tie SD10112DBB #10 x 1-1/2" Outdoor Accents® connector screw reduces installation time by driving easily without pre-drilling. Designed for installation with the Outdoor Accents APA21 90-degree angle, the screw's black finish accents any outdoor living project. The sharp point of the screw enables fast starts, and the patented serrated threads reduce torque for improved drivability. Use with Outdoor Accents® connectors (sold separately) for a decorative look. 1/4"...

Simpson Strong-Tie Outdoor Accents® APLH24 concealed flange light hangers connect 2x4 joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking...

Simpson Strong-Tie Outdoor Accents® APLH24 concealed flange light hangers connect 2x4 joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. The APLH24 hanger installs easily with the Outdoor Accents® connector screw. Install with Outdoor Accents® SD10112DBB structural screws for a decorative look and meet required load values. Designed for use with 2x4 joists. Material: 14 Gauge Steel Coating:...

Simpson Strong-Tie Outdoor Accents® APHH46 concealed flange heavy hangers connect 4 x 6 or 4 x 8 beams to girders or ledgers. These concealed-flange hangers feature straight edges and provide a...

Simpson Strong-Tie Outdoor Accents® APHH46 concealed flange heavy hangers connect 4 x 6 or 4 x 8 beams to girders or ledgers. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. The APHH46 heavy hanger installs easily with the Outdoor Accents® SDWS22312DBB connector screws and STN22 hex-head washers. Use Strong-Drive SDS25300 Heavy-Duty Connector screws to connect to the header Install with Outdoor Accents®...

The Simpson Strong-Tie PAB4-12 1/2" x 12" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...

The Simpson Strong-Tie PAB4-12 1/2" x 12" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

The Simpson Strong-Drive® SDWS16212Q 2-1/2" x .160" Framing screw is designed and load-rated for replacing 16d, 10d and 8d nails in multiple types of framing applications. The SDWS Framing screw...

The Simpson Strong-Drive® SDWS16212Q 2-1/2" x .160" Framing screw is designed and load-rated for replacing 16d, 10d and 8d nails in multiple types of framing applications. The SDWS Framing screw is 0.160" in diameter and superior to nails in holding power and pull-out resistance. It is code listed under IAPMO UES ER-192 and meets 2012 and 2015 IRC® and IBC® code requirements for several common wood framing and engineered-wood applications. The screw has a SawTooth™ point that makes...

Simpson Strong-Tie FWANZ foundation anchor connects the foundation or basement wall to the floor system to resist out-of-plane forces imposed by soil pressure. The foundation wall angle fastens to...

Simpson Strong-Tie FWANZ foundation anchor connects the foundation or basement wall to the floor system to resist out-of-plane forces imposed by soil pressure. The foundation wall angle fastens to the mudsill with nails, relying on other anchorage (by designer) to anchor the sill plate to the foundation. Compatible with solid sawn joists, I-joists and floor trusses Testing performed on most common rim materials and types Addresses design needs set forth in Section 1610.1 in the 2015 / 2018 /...

The Simpson Strong-Tie VPA2 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 1-1/2" wide rafters to the top plate. It will adjust to accommodate...

The Simpson Strong-Tie VPA2 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 1-1/2" wide rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSR Series Field-Adjustable Jack Hangers. This VPA series connectors eliminate the need for notched rafters, beveled top plates and toe nailing. Material: 18 Gauge Finish: Standard G90 Zinc Width: 1-9/16" Actual Joist Width: 1-1/2"...

The Simpson Strong-Tie ML23Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood...

The Simpson Strong-Tie ML23Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (4) SDS25112 Screws Dimensions: 3" Length x 2" (Flange Widths) ML23Z Information and...

Simpson Strong-Tie HRS6 12-Gauge Heavy Strap Ties are designed to splice 2x lumber using the the edge. The hole design reduces splitting in the lumber so you achieve the desired load value....

Simpson Strong-Tie HRS6 12-Gauge Heavy Strap Ties are designed to splice 2x lumber using the the edge. The hole design reduces splitting in the lumber so you achieve the desired load value. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-3/8" (Wide) x 6" (Length) Fastener Options: (6) .148" x 2-1/2" Nails or (6) SD9112 Structural Screws HRS6 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains...

The Simpson Strong-Tie TNT18114H Titen Turbo™ 3/16" x 1-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...

The Simpson Strong-Tie TNT18114H Titen Turbo™ 3/16" x 1-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...

The Simpson Strong-Tie THDB25178CS 1/4" x 1-7/8" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease...

The Simpson Strong-Tie THDB25178CS 1/4" x 1-7/8" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount profile. Countersinking...

The Simpson Strong-Tie THDC25200H6SS Type 316 Stainless Steel 1/4" x 2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...

The Simpson Strong-Tie THDC25200H6SS Type 316 Stainless Steel 1/4" x 2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...

The Quik Drive® PRO300SM35K Auto-Feed Screw Driving tool is the ideal tool for installing Quik Drive® Screws up to 3" in plywood subfloor, 2x Decking and more. The Sure-Grip guide tube...

The Quik Drive® PRO300SM35K Auto-Feed Screw Driving tool is the ideal tool for installing Quik Drive® Screws up to 3" in plywood subfloor, 2x Decking and more. The Sure-Grip guide tube increases the stability of the PRO300SM35K for a wide range of screws. The decking nose clip positions the screw on the deck board and centers it on the joist for an easy, uniform installation from a standing position. Kit Includes (1 Each): Makita 3500 RPM Screwdriver, PRO300S Attachment, Extension for...

The Simpson Strong-Tie PT-27 Powder Actuated Tool is a semi-automatic and fast-cycling fastening tool that is engineered for continuous use, high reliability and low maintenance. This versatile tool...

The Simpson Strong-Tie PT-27 Powder Actuated Tool is a semi-automatic and fast-cycling fastening tool that is engineered for continuous use, high reliability and low maintenance. This versatile tool fires a variety of fastener types and lengths. Key Fastening Applications• includes acoustical ceilings•, electrical applications•, sill plates•, drywall track•, waterproofing material, lathing and more. Reliable design of the world's most popular tool Semi-automatic and fast cycling Engineered for...

The Simpson Strong-Tie H1A Hurricane Tie provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2x...

The Simpson Strong-Tie H1A Hurricane Tie provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2x lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance. Holds the rafter or truss on both sides for high lateral load resistance Can be installed on inside or outside of wall, or...

Simpson Strong-Tie N8DHDG-R 1-1/2" x .131" Hot Dipped Galvanized nails are mostly used used in angle clips and straps to reach the load values that are required. There are 150 nails in the pack. The...

Simpson Strong-Tie N8DHDG-R 1-1/2" x .131" Hot Dipped Galvanized nails are mostly used used in angle clips and straps to reach the load values that are required. There are 150 nails in the pack. The nails are hot dipped galvanized, providing medium corrosion protection. N8DHDG-R Information and Data Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The coating weight increases with material thickness. The minimum average coating weight...

Simpson Strong-Tie HL33 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33 to connect lumber to concrete using an a wedge...

Simpson Strong-Tie HL33 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2) 1/2" HL33 Heavy Angle Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

The THDB25178H 1/4" x 1-7/8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal...

The THDB25178H 1/4" x 1-7/8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The...

The Simpson Strong-Tie WT-6 Wedge Form Ties are designed for low foundation wall applications with a 6" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and...

The Simpson Strong-Tie WT-6 Wedge Form Ties are designed for low foundation wall applications with a 6" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 6". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Explanation of "Stock" Availability Term Stock...

The Simpson Strong-Tie SSTB16 (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to...

The Simpson Strong-Tie SSTB16 (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 17-5/8" Minimum Embedment: 12-5/8" Finish: None Rolled threads for higher...

The geometry of the Simpson Strong-Tie SB5/8x24 5/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor...

The geometry of the Simpson Strong-Tie SB5/8x24 5/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 6" wide concrete stem wall without creating excessive horizontal forces. The SB5/8x24 is designed to maximize performance with minimum embedment of 18". Identification on the bolt head showing embedment angle and model Stamped embedment line Rolled thread for higher...

The Simpson PB44 Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed...

The Simpson PB44 Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Common Nails PB44 information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides)....

Simpson Strong-Tie MASA anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASA is not only quick to install they also eliminate the...

Simpson Strong-Tie MASA anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASA is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASA version is used for installation on standards forms. Attaches easily to the concrete form for quick installation Lays flat on the form board so there is no anchor bolt to finish around No labor costs involved in drilling plates and...