Simpson Strong-Tie

Simpson Strong-Tie ECCOQ5-SDS2.5 Weld-On End Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel...

Simpson Strong-Tie ECCOQ5-SDS2.5 Weld-On End Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel members. The column cap features a design without legs, enabling a field-welded attachment to steel columns and beams. The seat of the column cap provides additional surface area for bearing that extends beyond the side of the column. This helps distribute the load from the beam and provide support for the...

Simpson Strong-Tie ECCLR444HDG Hot Dipped Galvanized End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Material: 7 gauge...

Simpson Strong-Tie ECCLR444HDG Hot Dipped Galvanized End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 3-1/2" (Beams) x 3-1/2" (Posts) Fasteners: (4) 5/8" x 4-1/2" Machine Bolts (Beam & Post) ECCLR444HDG Information and Installation Instructions. Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The...

Simpson Strong-Tie CCOQ5-SDS2.5 Weld-On Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel members. The...

Simpson Strong-Tie CCOQ5-SDS2.5 Weld-On Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel members. The column cap features a design without legs, enabling a field-welded attachment to steel columns and beams. The seat of the column cap provides additional surface area for bearing that extends beyond the side of the column. This helps distribute the load from the beam and provide support for the...

The Simpson Strong-Tie ABW7-7Z for 7-1/8" x 7-1/8" glulam posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff...

The Simpson Strong-Tie ABW7-7Z for 7-1/8" x 7-1/8" glulam posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Additionally the ZMax® coating provides additional protection from exposure to the...

Simpson Strong-Tie ECCLR464 End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Material: 7 gauge Finish: Simpson Gray Paint...

Simpson Strong-Tie ECCLR464 End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 3-1/2" (Beams) x 5-1/2" (Posts) Fasteners: (6) 5/8" Diameter Machine Bolts ECCLR464 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint intended to only protect the product while it is being warehoused and in...

The Simpson Strong-Tie ETB68S 11/16" Wire Brush is part of the Simpson wire brush system that is specifically designed for use with Simpson Strong-Tie® SET-3G™ and AT-3G™ adhesives...

The Simpson Strong-Tie ETB68S 11/16" Wire Brush is part of the Simpson wire brush system that is specifically designed for use with Simpson Strong-Tie® SET-3G™ and AT-3G™ adhesives to permit proper hole cleaning with fewer brush strokes at embedments up to 20 times the anchor diameter. Useable Length: 5" Hole Size: 11/16" Anchor Diameter 5/8" Rebar Size N/A Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either...

The Simpson Strong-Tie BA1.81/11.25 Top Flange Hanger is designed for 1-3/4" x 11-1/4" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid...

The Simpson Strong-Tie BA1.81/11.25 Top Flange Hanger is designed for 1-3/4" x 11-1/4" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top...

The Simpson MIU2.1/11 hanger is designed to hang 2" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.1/11 features positive-angle...

The Simpson MIU2.1/11 hanger is designed to hang 2" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.1/11 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson T15N150SFB 1-1/2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The...

The Simpson T15N150SFB 1-1/2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style head has greater bearing area to draw trim to the substrate. DA Style Finish Nails Fit the Following Tools: (Please check your owners manual regarding the proper lengths that your tool can use) Senco: FinishPro42XP, FinishPro41XP, FinishPro35, SFN40, SFN30, SFN1, SFN2B, SN1...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong Tie HUS28 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong Tie HUS28 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. HUS28 hangers are also approved for installation with SD10 x 2-1/2" Structural Screws. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions:...

The Simpson Strong-Tie LSSR2.37Z Slopeable and Skewable Rafter Hanger allows you to install a 2-5/16" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile...

The Simpson Strong-Tie LSSR2.37Z Slopeable and Skewable Rafter Hanger allows you to install a 2-5/16" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 16 gauge Finish: ZMax® G-185 Coating Dimensions: 4-1/8" (Flange Width) x 8-15/16" (Height) x 2-3/8" (Joist Width) Fastener...

The THD37134H 3/8" x 1-3/4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal...

The THD37134H 3/8" x 1-3/4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The...

Save by Purchasing a Quantity of 36 Boxes (3600 Pieces)! Simpson Strong Tie LUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points...

Save by Purchasing a Quantity of 36 Boxes (3600 Pieces)! Simpson Strong Tie LUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26 hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16"...

Simpson Strong Tie U26R 2 x 6/8 Rough Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....

Simpson Strong Tie U26R 2 x 6/8 Rough Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 5-5/8" (Height) x 2" (Seat Depth) Fastener Options: (8) .162" x 3-1/2" 16d Nails (Header) (4) .148" x 1-1/2" 10d Nails (Joist) U26R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...

The Simpson Strong-Tie TNT25134H Titen Turbo™ 1/4" x 1-3/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...

The Simpson Strong-Tie TNT25134H Titen Turbo™ 1/4" x 1-3/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...

The Simpson Strong-Tie HU28-2TF is a hybrid 2 x 8-2 double hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features...

The Simpson Strong-Tie HU28-2TF is a hybrid 2 x 8-2 double hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 7-1/4" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top...

Simpson Strong-Tie APBDW44 4x4 Decorative Post Base Wrap is a 4-sided set of decorative plates that wrap around nominal 4x4 posts installed with MPB44Z, CBSQ44, ABU44Z, ABW44Z and ABA44Z post bases....

Simpson Strong-Tie APBDW44 4x4 Decorative Post Base Wrap is a 4-sided set of decorative plates that wrap around nominal 4x4 posts installed with MPB44Z, CBSQ44, ABU44Z, ABW44Z and ABA44Z post bases. Made with composite plastic the four pieces screw together creating a finished look to the connection. Please Note: This product will not work with connections that use machine bolts. Material: Black Composite Plastic Width: 4-3/4" Height: 10-11/16" Includes: (12) Screws and (1) 4-Sided Set APBDW44...

The Simpson Strong-Tie BC60R Half Base is an economical way to attach a rough 6 x 6 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 6" x (L) 6" x (H) 3" Finish:...

The Simpson Strong-Tie BC60R Half Base is an economical way to attach a rough 6 x 6 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 6" x (L) 6" x (H) 3" Finish: Standard G90 Zinc Fastener Options: (10) 16d Nails (10) SD10 x 1-1/2" BC60R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides...

Simpson Strong-Tie PDPAWL-187 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin...

Simpson Strong-Tie PDPAWL-187 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. Length: 1-7/8" Head Diameter: .300" Shank Diameter: .157" Coating: Standard G90 Zinc PDPAWL Series Fasteners Tension and Shear Loads in Normal Weight Concrete PAT Fastener MSDS Standard G90 Zinc...

Save by Purchasing a Quantity of 10 Boxes (90 Pieces)! Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed...

Save by Purchasing a Quantity of 10 Boxes (90 Pieces)! Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

The Simpson Strong-Tie HTC4 Double Slotted Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The HTC4 has three 2-1/2" slots that will permit the truss chord...

The Simpson Strong-Tie HTC4 Double Slotted Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The HTC4 has three 2-1/2" slots that will permit the truss chord to move vertically when loads are applied to the roof. This connector has high lateral capacity and can be used on 2 x 4 and 2 x 6 top plates Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (9) .148 x 3" Nails HTC4 Information and Installation Instructions Standard G90 Zinc Galvanized...

The Simpson Strong-Tie RTF2Z ZMax® Rigid Tie® Connector is designed to connect two horizontal 2x members to a vertical 2x4 in wood applications. Manufactured to high-quality standards to...

The Simpson Strong-Tie RTF2Z ZMax® Rigid Tie® Connector is designed to connect two horizontal 2x members to a vertical 2x4 in wood applications. Manufactured to high-quality standards to ensure solid performance, this flat rigid tie connector features a ZMax® galvanized finish for added corrosion resistance. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included) Constructed from corrosion-resistant galvanized steel Easier and stronger than angled fastening...

Save by Purchasing a Pallet of 96 Boxes! The Simpson Strong-Tie A35 Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely...

Save by Purchasing a Pallet of 96 Boxes! The Simpson Strong-Tie A35 Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the A35 to secure a great variety of wood-to-wood connections including joist-to-plate, studs-to-plate, joist-to-beams and ceiling joists-to beams. Material: 18 Gauge Finish: Standard G90 Length: 4-1/2" Flange Widths: 1-7/16" Fasteners: (9-12) 8d x 1-1/2" (9-12) SD #9 x...

Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H2.5A Ties can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top...

Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H2.5A Ties can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate to the rafter or truss. This clip accepts 8d .131" x 1-1/2" joist nails or longer. You can also substitute the Simpson SD #9 x 1-1/2" Structural Screw. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (10) 8d x 1-1/2" Nails or (10) SD9 x 1-1/2" Screws H2.5A Information and Installation...