Login/Register
Shopping Cart
OR
The Simpson Strong-Tie A24Z ZMax® Framing Clips for various wood to wood connections at a 90° angle. ZMax® coating provides corrosion resistance when required. Material: 12 Gauge Finish:...
The Simpson Strong-Tie A24Z ZMax® Framing Clips for various wood to wood connections at a 90° angle. ZMax® coating provides corrosion resistance when required. Material: 12 Gauge Finish: ZMax® G-185 Coating Length (L): 2-1/2" Flange #1 (W1): 3-7/8" Flange #2 (W2): 2" Fasteners: (2) 1/2" machine Bolts A24Z Information and Installation Instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than...
The Simpson Strong-Tie DSC5R-SDS3HDG Hot Dipped Galvanized Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed...
The Simpson Strong-Tie DSC5R-SDS3HDG Hot Dipped Galvanized Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. The DSC5R-SDS3 series drag strut connectors requires 40% less fasteners than the DSC4L connector but gets 12% higher loads. Material: 3 gauge Finish: Hot Dipped Galvanized Dimensions: 21" (Length) x 3" (Flanges) Included Fasteners: (24) SDS...
The Simpson Strong-Tie HD7BHDG Hot Dipped Galvanized Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This...
The Simpson Strong-Tie HD7BHDG Hot Dipped Galvanized Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown uses the same design as the HDQ8-SDS2.5 holdown that is proven to greatly reduce deflection while under load. All the HDB style holdown anchors are designed to provide loads for intermediate-load-range shearwalls, braced wall panels and lateral applications. The HD7B must be connected to a...
The Simpson Strong-Tie DTT2SS-SDS2.5 Type 316L Stainless Steel Tension Tie with 2-1/2" Stainless SDS Screws is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because...
The Simpson Strong-Tie DTT2SS-SDS2.5 Type 316L Stainless Steel Tension Tie with 2-1/2" Stainless SDS Screws is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2SS also complies with the new IRC...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH46-8/3 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 3x sill plate. 1-1/2" clearance...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH46-8/3 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 3x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 2-7/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-8/3 Information and Installation Instructions. Gray Paint Coating Information...
Save by Purchasing a Quantity of 7 Boxes (63 Pieces)! The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using...
Save by Purchasing a Quantity of 7 Boxes (63 Pieces)! The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 6 Nominal (3-1/2" x 5-1/2") Base: 12 Ga. (3-9/16" x 5-5/16") Strap: 10 Ga. x 3" Wide x...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! Simpson Strong-Tie HDU4-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! Simpson Strong-Tie HDU4-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (10) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90...
Save by Purchasing a Pallet of 44 Boxes! Simpson Strong-Tie MASAZ ZMax® anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAZ is...
Save by Purchasing a Pallet of 44 Boxes! Simpson Strong-Tie MASAZ ZMax® anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAZ is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAZ version is used for installation on standards forms. Attaches easily to the concrete form for quick installation Lays flat on the form board so there is no anchor bolt to finish...
The Simpson Strong-Tie ABU46SS with Type 316L Stainless Steel Corrosion Resistance is an adjustable post base for nominal size 4 x 6 post offers moisture protection and a finished hardware...
The Simpson Strong-Tie ABU46SS with Type 316L Stainless Steel Corrosion Resistance is an adjustable post base for nominal size 4 x 6 post offers moisture protection and a finished hardware appearance. The ABU46SS features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 12 Gauge Strap Material: 12 Gauge...
Simpson Strong-Tie MDPL01507H 5/32" x 4-1/8" x 7" SDS-Plus Titen Hex Bit are carbide-tipped drill bits that are premium quality, professional-grade tools manufactured in Germany to the highest...
Simpson Strong-Tie MDPL01507H 5/32" x 4-1/8" x 7" SDS-Plus Titen Hex Bit are carbide-tipped drill bits that are premium quality, professional-grade tools manufactured in Germany to the highest industry standards for Simpson Strong-Tie. They are designed to meet precise tolerance requirements and incorporate proprietary features that enhance durability and drilling speed, while improving ease of use. The hex-bit configuration allows you to use the bits in aa installation kit to install faster...
The Simpson Strong-Tie HU28TF is a hybrid 2 x 8 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that...
The Simpson Strong-Tie HU28TF is a hybrid 2 x 8 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 7-1/8" (Height) x 2-1/4" (Seat Depth) x 2-7/16" (Top Flange) Fasteners: (10)...
Simpson Strong-Tie TA9SS Stainless Steel Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9SS angles...
Simpson Strong-Tie TA9SS Stainless Steel Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9SS angles are easily installed with (5) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: SDS screws are not included. Finish: Type 316L Stainless Steel Material: 12 Gauge Fasteners (Not Included): (Min) SDS25112 Screws - (2) Stringer, (3) Tread (Max) SDS25112 Screws - (3) Stringer, (2) Tread...
The Simpson Strong-Tie TNT18134TF Titen Turbo™ 3/16" x 1-3/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the...
The Simpson Strong-Tie TNT18134TF Titen Turbo™ 3/16" x 1-3/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping...
Simpson Strong-Tie ECC46HDG Hot Dipped Galvanized End Column Caps provide a high capacity connection between a 4x wide beam and a 6x post. ECC46HDG End Column Caps should be used when the 4x beam...
Simpson Strong-Tie ECC46HDG Hot Dipped Galvanized End Column Caps provide a high capacity connection between a 4x wide beam and a 6x post. ECC46HDG End Column Caps should be used when the 4x beam ends at the 6x post. Please Note: This column cap is also available in powder coat as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-5/8" (Beam) x 5-1/2" (Post) x 8-1/2" (Length) Fasteners: (2) 5/8"...
The Simpson Strong-Tie LSSR2.1Z Slopeable and Skewable Rafter Hanger allows you to install either a 2" or 2-1/16" wide rafter with either a plumb cut or miter cut that has been tacked in place. This...
The Simpson Strong-Tie LSSR2.1Z Slopeable and Skewable Rafter Hanger allows you to install either a 2" or 2-1/16" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 16 gauge Finish: ZMax® G-185 Coating Dimensions: 4-1/8" (Flange Width) x 8-15/16" (Height) x 2-1/8" (Joist Width)...
The Simpson Strong-Tie 2" x 11-7/8" MIT2.1/11.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but...
The Simpson Strong-Tie 2" x 11-7/8" MIT2.1/11.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS1.81/11.88 sets a new standard for engineered wood top flange hangers. The ITS1.81/11.88 installs 1-3/4" x 11-7/8"...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS1.81/11.88 sets a new standard for engineered wood top flange hangers. The ITS1.81/11.88 installs 1-3/4" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1...
Simpson Strong Tie HUCQ210-2SS-SDS Stainless Steel 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-2SS-SDS hangers...
Simpson Strong Tie HUCQ210-2SS-SDS Stainless Steel 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-2SS-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Type 316L Stainless Steel Dimensions: 3-1/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4"...
Save by Purchasing a Quantity of 12 Boxes (1200 Pieces)! Simpson Strong Tie U26 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain...
Save by Purchasing a Quantity of 12 Boxes (1200 Pieces)! Simpson Strong Tie U26 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 2" (Seat Depth) Fastener Options: (6) .162" x 3-1/2" 16d Nails (Header) (4) .148" x 1-1/2" 10d Nails (Joist) U26 Information and Installation Instructions....
The Simpson T9A150MCN 1-1/2" x .148" Type 316 Stainless Steel Metal Connector Nails is designed to be used in 31/33 Degree Metal Connector Tools for installing Simpson Strong-Tie structural...
The Simpson T9A150MCN 1-1/2" x .148" Type 316 Stainless Steel Metal Connector Nails is designed to be used in 31/33 Degree Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Please Note: Consult your manufacturer's catalog to determine the...
The Simpson Strong-Tie THD37300H4SS Type 304 Stainless Steel 3/8" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THD37300H4SS Type 304 Stainless Steel 3/8" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson Strong-Tie BA1.81/9.5 Top Flange Hanger is designed for 1-3/4" x 9-1/2" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn...
The Simpson Strong-Tie BA1.81/9.5 Top Flange Hanger is designed for 1-3/4" x 9-1/2" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top...
The Simpson Strong-Tie ETB62S 5/8" Wire Brush is part of the Simpson wire brush system that is specifically designed for use with Simpson Strong-Tie® SET-3G™ and AT-3G™ adhesives to...
The Simpson Strong-Tie ETB62S 5/8" Wire Brush is part of the Simpson wire brush system that is specifically designed for use with Simpson Strong-Tie® SET-3G™ and AT-3G™ adhesives to permit proper hole cleaning with fewer brush strokes at embedments up to 20 times the anchor diameter. Useable Length: 5" Hole Size: 5/8" Anchor Diameter N/A Rebar Size #4 Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from...
The Simpson T15N150SFB 1-1/2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The...
The Simpson T15N150SFB 1-1/2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style head has greater bearing area to draw trim to the substrate. DA Style Finish Nails Fit the Following Tools: (Please check your owners manual regarding the proper lengths that your tool can use) Senco: FinishPro42XP, FinishPro41XP, FinishPro35, SFN40, SFN30, SFN1, SFN2B, SN1...