Simpson Strong-Tie

The Simpson Strong-Tie RTA4 Rigid Tie® is designed to connect two 4x posts and joists at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle...

The Simpson Strong-Tie RTA4 Rigid Tie® is designed to connect two 4x posts and joists at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a galvanized finish for added corrosion resistance. Ideal for gates, fences or any project where a 90® connection is needed Fastens with #8 x 1-1/4" SD Screws (not included) Provides a strong...

The Simpson Strong-Tie A24 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 2-1/2" Flange #1 (W1): 3-7/8" Flange...

The Simpson Strong-Tie A24 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 2-1/2" Flange #1 (W1): 3-7/8" Flange #2 (W2): 2" Fasteners: (2) 1/2" machine Bolts A24 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...

The Simpson Strong-Tie DSPZ ZMax® Double Stud Plate Tie is a prebent strap designed to connect double studs to either top or bottom plates. This versatile double-stud-plate connector helps to...

The Simpson Strong-Tie DSPZ ZMax® Double Stud Plate Tie is a prebent strap designed to connect double studs to either top or bottom plates. This versatile double-stud-plate connector helps to create a continuous load path in uplift resistance. The DSP features a top flange that allows the plate to attach securely to both sill plates and top plates. ZMax® coating provides extra corrosion resistance when used in more corrosive environments. Embossments feature provides strength at the...

Simpson Strong Tie HUCQ210-2Z-SDS ZMax® 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-2Z-SDS hangers with...

Simpson Strong Tie HUCQ210-2Z-SDS ZMax® 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-2Z-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: ZMax® G-185 Galvanized Dimensions: 3-1/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x...

The Simpson Strong-Tie STCT Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. Use STCT clips where truss and rafter are separated from the top plate of the...

The Simpson Strong-Tie STCT Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. Use STCT clips where truss and rafter are separated from the top plate of the non-bearing wall. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (3) 8d Nails STCT Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides)....

The Simpson Strong Tie GH46-8/3 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 3x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if...

The Simpson Strong Tie GH46-8/3 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 3x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 2-7/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-8/3 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint...

Simpson Strong-Tie Outdoor Accents® flat APT4 T-Straps bring decorative appeal and lateral strength to any outdoor living space like patio covers, gazebos and more. The APT4 T-Straps provide...

Simpson Strong-Tie Outdoor Accents® flat APT4 T-Straps bring decorative appeal and lateral strength to any outdoor living space like patio covers, gazebos and more. The APT4 T-Straps provide reinforcement for a connection where two 4x or larger lumber pieces intersect at a 90-degree angle in the center of the beam. These straps are easily installed with Outdoor Accents structural screws and hex-head washers. Install with Outdoor Accents® structural screws and hex-head washer (sold...

The Simpson Strong-Tie DTT2SS Type 316L Stainless Steel Tension Tie is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck...

The Simpson Strong-Tie DTT2SS Type 316L Stainless Steel Tension Tie is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2SS also complies with the new IRC requirements for laterally tying the deck to...

The Simpson Strong-Tie LSSJ210LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 10 jack rafters to hip/valley members when the rafter skews to the left. Its simple design...

The Simpson Strong-Tie LSSJ210LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 10 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ210LZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter...

The THDB25400H 1/4" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...

The THDB25400H 1/4" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...

The Simpson Strong-Tie APDJT2R-4 Deck Joist Tie attaches 2x rough joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and...

The Simpson Strong-Tie APDJT2R-4 Deck Joist Tie attaches 2x rough joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection. Designed to meet stringent building codes for seismic or high-wind events Install with Outdoor Accents® structural wood screws and hex-head washers (sold separately) for a decorative look Material: 12 Gauge Steel Coating: ZMax® galvanized...

Simpson Strong-Tie Outdoor Accents® APLH210 concealed flange light hangers connect 2 x 10 or 2 x 12 joists to beams. These concealed-flange hangers feature straight edges and provide a...

Simpson Strong-Tie Outdoor Accents® APLH210 concealed flange light hangers connect 2 x 10 or 2 x 12 joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. The APLH210 hanger installs easily with the Outdoor Accents® connector screw. Install with Outdoor Accents® SD10112DBB structural screws for a decorative look and meet required load values. Designed for use with 2 x 10 and 2 x 12 joists. Material:...

The SSTB16LHDG Hot Dipped Galvanized (5/8" Diameter by 19-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to...

The SSTB16LHDG Hot Dipped Galvanized (5/8" Diameter by 19-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 19-5/8" Minimum Embedment: 12-5/8" Finish: Hot Dipped Galvanized...

Simpson Strong-Tie Outdoor Accents® APA6 angles tie together beams, rafters and more. The APA6 angle makes structural connections between 6x beams and posts much more visually appealing. These...

Simpson Strong-Tie Outdoor Accents® APA6 angles tie together beams, rafters and more. The APA6 angle makes structural connections between 6x beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Using The Outdoor Accents® structural screws and STN22 Shear Tube nuts allows you to create an outdoor gazebo, patio cover etc. that is not only structurally sound but pleasing to the eye....

The new patent-pending Simpson Strong-Tie® MPB88Z is the first post base specifically designed to provide moment resistance for 8 x 8 columns or posts. An innovative overlapping sleeve design...

The new patent-pending Simpson Strong-Tie® MPB88Z is the first post base specifically designed to provide moment resistance for 8 x 8 columns or posts. An innovative overlapping sleeve design encapsulates the post, helping to resist rotation around its base. The MPB88Z is ideal for outdoor structures, such as carports, fences and decks. Built-in standoff tabs provide the required 1" standoff to resist decay of the post while eliminating multiple parts and assembly. Additionally, the MPB88Z...

The Simpson Strong-Tie DSVT312R5LB #10 x 3-1/2" Deck Drive™ Tan Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and...

The Simpson Strong-Tie DSVT312R5LB #10 x 3-1/2" Deck Drive™ Tan Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today’s wood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber. Also DSV screws are available in collated strips for use in the Quik Drive® auto-feed screw driving...

The Simpson Strong-Tie PAB4-30 1/2" x 30" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...

The Simpson Strong-Tie PAB4-30 1/2" x 30" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

The Simpson Strong-Tie VPA35 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 2-1/4" or 2-5/16" wide rafters to the top plate. It will adjust to...

The Simpson Strong-Tie VPA35 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 2-1/4" or 2-5/16" wide rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSR Series Field-Adjustable Jack Hangers. This VPA series connectors eliminate the need for notched rafters, beveled top plates and toe nailing. Material: 18 Gauge Finish: Standard G90 Zinc Width: 2-5/16" Actual Joist...

The Simpson Strong-Tie Type 316L Stainless Steel LS50SS Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips...

The Simpson Strong-Tie Type 316L Stainless Steel LS50SS Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS50SS Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. The type 316L Stainless Steel allows you to use the LS50SS angles in highly corrosive environments. Material: 18 Gauge Finish: Type 316L Stainless Steel Length:...

Simpson Strong-Tie TA9ZKT Staircase Angle Kit are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily...

Simpson Strong-Tie TA9ZKT Staircase Angle Kit are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily installed with (5) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: Kit includes two (2) angles with ten (10) SDS25112 Screws Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (Min) SDS25112 Screws - (2) Stringer, (3) Tread (Max) SDS25112 Screws - (3) Stringer, (2) Tread...

The Simpson Strong-Drive® SDS25200SS-R25 1/4" x 2" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications....

The Simpson Strong-Drive® SDS25200SS-R25 1/4" x 2" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25200SS-R25 stainless steel screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 2" Thread Length: 1-1/4" Serrated Shank Diameter:...

The Simpson Strong-Tie H1.81Z ZMax® Hurricane Tie is designed for use with 1 3/4" LVL roof rafters to provide a stronger connection to the top plate of the wall. It's ideal for connections when...

The Simpson Strong-Tie H1.81Z ZMax® Hurricane Tie is designed for use with 1 3/4" LVL roof rafters to provide a stronger connection to the top plate of the wall. It's ideal for connections when there are higher-load demands on the structure, like a heavy snow load, and provides lateral resistance in a seismic event. This 1 3/4"-wide H1.81Z connector is the first hurricane tie to be specifically sized for engineered wood. The H1.81Z installs with half the nails that are needed for two...

Simpson Strong-Tie Avant Outdoor Accents® APVB44R post bases secure a rough 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other...

Simpson Strong-Tie Avant Outdoor Accents® APVB44R post bases secure a rough 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature a clean, simple design and provide ZMAX® galvanization with black powder coat for extra corrosion resistance. APVB44R bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture. The Avant Collection features straight edges...

Simpson Strong-Tie EPB44PHDG Hot Dipped Galvanized allows you to install an elevated 4 x 4 post base from 1" to 2-1/2" above concrete in both cast in place and retrofit applications. This clearance...

Simpson Strong-Tie EPB44PHDG Hot Dipped Galvanized allows you to install an elevated 4 x 4 post base from 1" to 2-1/2" above concrete in both cast in place and retrofit applications. This clearance allows the 4 x 4 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Hot...