Simpson Strong-Tie

Simpson Strong-Tie HTP37Z 16-Gauge 3" Wide Strap Ties are designed to splice 2 x 4 or larger lumber using the face. This splice strap uses N10 .148 x 1-1/2" nails or SD9112 strustural screws to...

Simpson Strong-Tie HTP37Z 16-Gauge 3" Wide Strap Ties are designed to splice 2 x 4 or larger lumber using the face. This splice strap uses N10 .148 x 1-1/2" nails or SD9112 strustural screws to reach desired load. Material: 16 gauge Finish: ZMax® G185 Galvanized Dimensions: 3" (Wide) x 7" (Length) Fastener Options: (20) .148 x 1-1/2" Nails or (20) SD9112 Structural Screws HTP37Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a...

Simpson Strong-Tie HDU4-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (10) 2-1/2" Simpson...

Simpson Strong-Tie HDU4-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (10) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 5/8" Pre-deflected...

The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post...

The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 6 Nominal (3-1/2" x 5-1/2") Base: 12 Ga. (3-9/16" x 5-5/16") Strap: 10 Ga. x 3" Wide x 8-11/16" High CBSQ46 Information and Installation...

Simpson Strong-Tie PDPAWL-125 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin...

Simpson Strong-Tie PDPAWL-125 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. Length: 1-1/4" Head Diameter: .300" Shank Diameter: .157" Coating: Standard G90 Zinc PDPAWL Series Fasteners Tension and Shear Loads in Normal Weight Concrete PAT Fastener MSDS Standard G90 Zinc...

The Simpson Strong-Tie L50Z Reinforcing Angle with ZMax® protection is a 5" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility...

The Simpson Strong-Tie L50Z Reinforcing Angle with ZMax® protection is a 5" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L50 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: ZMax® Coating Length: 5" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (6) 10d x 1-1/2" Nails or (6) SD #10 x 1-1/2" Screws...

The geometry of the Simpson Strong-Tie SB1x30 1" x 30" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into...

The geometry of the Simpson Strong-Tie SB1x30 1" x 30" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB1x30 with a minimum embedment of 24" is intended to cover holdown devices that exceed the capacity of SSTB anchors. Identification on the bolt head showing embedment angle and model Stamped...

Simpson Strong-Tie HL35 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35 to connect lumber to concrete using an a wedge...

Simpson Strong-Tie HL35 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with a gusset as a special order.  Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 5" (L) Bolt...

The Simpson Strong-Tie BC460 Half Base is an economical way to attach a nominal 4 x 6 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 5-1/2" x (L) 3-3/8" x (H) 3"...

The Simpson Strong-Tie BC460 Half Base is an economical way to attach a nominal 4 x 6 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 5-1/2" x (L) 3-3/8" x (H) 3" Finish: Standard G90 Zinc Fastener Options: (10) 16d Nails BC460 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low...

Simpson Strong-Tie ECCQ44SDS2.5 End Column Caps provide a high capacity connection between a 4x beam and a 4x post. ECCQ44SDS2.5 End Column Caps should be used when the beam ends at the post. Each...

Simpson Strong-Tie ECCQ44SDS2.5 End Column Caps provide a high capacity connection between a 4x beam and a 4x post. ECCQ44SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ44SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Stainless Steel as a special order. Please call our sales department direct at...

Simpson Strong-Tie ECCO4/6 End Column Caps with no straps provides a high capacity connection between a 4x wide beam and a steel post. The ECCO4/6 End Column Caps comes with no coating to allow you...

Simpson Strong-Tie ECCO4/6 End Column Caps with no straps provides a high capacity connection between a 4x wide beam and a steel post. The ECCO4/6 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: No Coating Dimensions: 3-5/8" (Beam) x...

The Simpson BC4 ZMax® Post Caps allow you to create a light duty connection between a 4 x 4 nominal post and 4x nominal beam. ZMax® coating provide corrosion resistance when caps are...

The Simpson BC4 ZMax® Post Caps allow you to create a light duty connection between a 4 x 4 nominal post and 4x nominal beam. ZMax® coating provide corrosion resistance when caps are installed in exposed locations. Material: 18 Gauge Finish: ZMax® G-185 Coating Dimensions 3-9/16" (W) x 3-9/16" (L) Fastener Options: (12) 16d or (12) SD10 x 1-1/2" BC4Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating...

Simpson Strong-Tie ECC46 End Column Caps provide a high capacity connection between a 4x wide beam and a 6x post. ECC46 End Column Caps should be used when the 4x beam ends at the 6x post. Please...

Simpson Strong-Tie ECC46 End Column Caps provide a high capacity connection between a 4x wide beam and a 6x post. ECC46 End Column Caps should be used when the 4x beam ends at the 6x post. Please Note: This column cap is also available in powder coat as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 3-5/8" (Beam) x 5-1/2" (Post) x 8-1/2" (Length) Fasteners: (2) 5/8" Machine Bolts (Beam) , (2)...

Simpson Strong Tie HU26-2 Double 2 x 6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...

Simpson Strong Tie HU26-2 Double 2 x 6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU26-2 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) Fastener...

Simpson Strong Tie U26 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material:...

Simpson Strong Tie U26 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 2" (Seat Depth) Fastener Options: (6) .162" x 3-1/2" 16d Nails (Header) (4) .148" x 1-1/2" 10d Nails (Joist) U26 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...

Simpson Strong-Tie ITS1.81/11.88 sets a new standard for engineered wood top flange hangers. The ITS1.81/11.88 installs 1-3/4" x 11-7/8" I-Joists faster and uses less nails than any other EWP top...

Simpson Strong-Tie ITS1.81/11.88 sets a new standard for engineered wood top flange hangers. The ITS1.81/11.88 installs 1-3/4" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in...

The Simpson Strong-Tie CJT5ZS is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or...

The Simpson Strong-Tie CJT5ZS is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT5ZS short (2-3/4") pins can be used with 3-1/8" Glulam Beams, 4x sawn lumber or 3-1/2" PSL. Minimum Joist Size: Douglas Fir - 4 x 12 Glulam Beam - 3-1/8" x 10-1/2"...

Simpson Strong-Tie LSTA21 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x...

Simpson Strong-Tie LSTA21 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a LSTA strap that requires bending the strap can only be bent one time. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 21" (Length) Fasteners: (16) 10d Nails (16) SD9 x 1-1/2" Screws...

Simpson Strong-Tie CMSTC16 Coil Strap allows you to install 3" wide strapping at various lengths depending on your span requirements. CMSTC16 are approved for use with SD Screws as a nail...

Simpson Strong-Tie CMSTC16 Coil Strap allows you to install 3" wide strapping at various lengths depending on your span requirements. CMSTC16 are approved for use with SD Screws as a nail substitution. For easier installation the CMSTC contains nail slots. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3" (Wide) x 54' (Length) Fasteners: 16d x 3-1/2" CMSTC16 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...

Simpson Strong-Tie MSTA15 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x...

Simpson Strong-Tie MSTA15 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 15" (Length) Fasteners: (12) 10d Nails (12) SD9 x 1-1/2" Screws...

The Simpson Strong-Tie SUL26Z Skewed Left 2 x 6/8 joist hangers with ZMax® coating are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will...

The Simpson Strong-Tie SUL26Z Skewed Left 2 x 6/8 joist hangers with ZMax® coating are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. ZMax coating provides additional corrosion protection when required. Material: 16 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside Flange) x...

The Simpson Strong-Tie DSC5R-SDS3 Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that...

The Simpson Strong-Tie DSC5R-SDS3 Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. The DSC5R-SDS3 drag strut connectors requires 40% less fasteners than the DSC4R connector but gets 12% higher loads. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 21" (Length) x 3" (Flanges) Included Fasteners: (24) SDS 1/4" x 3" DSC5R-SDS3...

The Simpson Strong-Tie® Strong-Drive® SDWS22500DB .220" x 5" wood screw is specifically designed for structural wood-to-wood applications and is also ideal for a wide variety of projects...

The Simpson Strong-Tie® Strong-Drive® SDWS22500DB .220" x 5" wood screw is specifically designed for structural wood-to-wood applications and is also ideal for a wide variety of projects where a high-strength attachment is needed. The 0.220" diameter of the SDWS22500DB 5" wood screw requires less torque to install than comparable fasteners, making it easier to drive. The Double-Barrier Coating corrosion-resistant coating makes it suitable for many interior and exterior applications....

Simpson Strong-Tie HTU210 2 x 10 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU210 hanger very versatile for various...

Simpson Strong-Tie HTU210 2 x 10 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU210 hanger very versatile for various trusses. Additionally you can have the HTU210 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is 1/8" per...

The Simpson Strong-Tie® Strong-Drive® SDWH19600DB 6" screw is ideal for structural and general-purpose fastening applications where a hex-head drive is preferred. This 0.195" diameter...

The Simpson Strong-Tie® Strong-Drive® SDWH19600DB 6" screw is ideal for structural and general-purpose fastening applications where a hex-head drive is preferred. This 0.195" diameter fastener requires less torque to install than comparable fasteners, making it easier to drive; while the corrosion-resistant coating makes it suitable for many interior and exterior applications. The large hex washer head of the SDWH19600DB 6" screw creates an excellent bearing area for a secure...