Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie SUR1.81/9 Skewed Right 1-3/4" x 9-1/4" or 9-1/2" LVL hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will...
The Simpson Strong-Tie SUR1.81/9 Skewed Right 1-3/4" x 9-1/4" or 9-1/2" LVL hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 1-3/4" x 9-1/4" or 9-1/2" LVL joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-13/16" (Wide) x 9" (Height) x 1-5/8" (Outside Flange) x 2-5/16" (Inside Flange) Base: 3" Fastener Options...
Simpson Strong Tie HU212-3 Triple 2 x 12 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HU212-3 Triple 2 x 12 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU212-3 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 4-11/16" (Wide) x 9-13/16" (Height) x 2-1/2" (Seat Depth)...
Simpson Strong-Tie ITS3.56/16 sets a new standard for engineered wood top flange hangers. The ITS3.56/16 installs 3-1/2" x 16" I-Joists faster and uses less nails than any other EWP top flange...
Simpson Strong-Tie ITS3.56/16 sets a new standard for engineered wood top flange hangers. The ITS3.56/16 installs 3-1/2" x 16" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the joist is...
Simpson Strong Tie LUS36 3 x 6/8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...
Simpson Strong Tie LUS36 3 x 6/8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS36 3 x 6/8 Hangers are approved for installation with 16D nails only. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-9/16" (Wide) x 5-1/4" (Height) x 2" (Seat Depth) Fastener...
The Simpson MIU4.75/14 hanger is designed to hang 4-5/8" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.75/14 features positive-angle...
The Simpson MIU4.75/14 hanger is designed to hang 4-5/8" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.75/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUR1.81/11 Skewed 45° Right Hanger can be used when hanging a 1-3/4" x 11-1/4" or 11-7/8" engineered wood joists. The angles nail slots direct nails for proper...
The Simpson Strong-Tie SUR1.81/11 Skewed 45° Right Hanger can be used when hanging a 1-3/4" x 11-1/4" or 11-7/8" engineered wood joists. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 1-3/4" x 11-1/4" or 11-7/8" engineered wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-13/16" (Wide) x 11" (Height) x 1-5/8" (Outside Flange) x 2-5/16"...
The Simpson Strong-Tie HU610TF is a hybrid 6 x 10 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing...
The Simpson Strong-Tie HU610TF is a hybrid 6 x 10 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 9-1/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (14)...
Simpson Strong Tie HUC212-3 Triple 2 x 12 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HUC212-3 Triple 2 x 12 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC212-3 hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where outside flanges will not work....
Simpson Strong Tie LUS36Z ZMax® 3 x 6/8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...
Simpson Strong Tie LUS36Z ZMax® 3 x 6/8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS36Z 3 x 6/8 Hangers are approved for installation with 16D nails only. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 2-9/16" (Wide) x 5-1/4" (Height) x 2" (Seat Depth)...
The Simpson MIU4.75/16 hanger is designed to hang 4-5/8" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.75/16 features positive-angle...
The Simpson MIU4.75/16 hanger is designed to hang 4-5/8" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.75/16 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUR1.81/14 Skewed 45° Right Hanger can be used when hanging a 1-3/4" x 14" engineered wood joists. The angles nail slots direct nails for proper installation. These...
The Simpson Strong-Tie SUR1.81/14 Skewed 45° Right Hanger can be used when hanging a 1-3/4" x 14" engineered wood joists. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 1-3/4" x 14" engineered wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-13/16" (Wide) x 13-3/4" (Height) x 1-5/8" (Outside Flange) x 2-5/16" (Inside Flange) Base:...
The Simpson Strong-Tie HUC610TF is a hybrid 6 x 10 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with...
The Simpson Strong-Tie HUC610TF is a hybrid 6 x 10 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with two concealed flanges for end-of-wall or corner installation. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 9-1/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (14)...
Simpson Strong Tie LUS310 3 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also...
Simpson Strong Tie LUS310 3 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS310 3 x 10/12 Hangers are approved for installation with 16D nails only. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-9/16" (Wide) x 7-1/4" (Height) x 2" (Seat Depth) Fastener...
The Simpson Strong-Tie 4" x 9-1/2" MIT4.12/9.5 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...
The Simpson Strong-Tie 4" x 9-1/2" MIT4.12/9.5 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
Simpson Strong Tie HU214 2 x 14 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...
Simpson Strong Tie HU214 2 x 14 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 10-1/8" (Height) x 2-1/4" (Seat Depth) Fasteners: (12) .162" x 3-1/2" 16d Nails (Header) (6) .148" x 1-1/2" 10d Nails (Joist) HU214 Information and...
The Simpson Strong-Tie 4" x 11-7/8" MIT4.12/11.88 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...
The Simpson Strong-Tie 4" x 11-7/8" MIT4.12/11.88 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...