Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson MIU8.12/9 hanger is designed to hang 5" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/9 features positive-angle...
The Simpson MIU8.12/9 hanger is designed to hang 5" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/9 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUL2.06/9 Skewed 45° Left Hanger can be used when hanging a 2" x 9-1/2" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers...
The Simpson Strong-Tie SUL2.06/9 Skewed 45° Left Hanger can be used when hanging a 2" x 9-1/2" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2" x 9-1/2" engineered wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 9-1/16" (Height) x 1-5/8" (Outside Flange) x 2-1/8" (Inside Flange) Base:...
The Simpson Strong-Tie HU612TF is a hybrid 6 x 12 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing...
The Simpson Strong-Tie HU612TF is a hybrid 6 x 12 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 11" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (16) .162...
The Simpson Strong-Tie HUC612TF is a hybrid 6 x 12 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with...
The Simpson Strong-Tie HUC612TF is a hybrid 6 x 12 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with two concealed flanges for end-of-wall or corner installation. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 11" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (16) .162...
The Simpson Strong-Tie 4-1/8" x 9-1/2" MIT4.28/9.5 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...
The Simpson Strong-Tie 4-1/8" x 9-1/2" MIT4.28/9.5 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
The Simpson MIU5.12/11 hanger is designed to hang 5" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/11 features positive-angle...
The Simpson MIU5.12/11 hanger is designed to hang 5" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/11 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUL2.06/11 Skewed 45° Left Hanger can be used when hanging a 2" x 11-7/8" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers...
The Simpson Strong-Tie SUL2.06/11 Skewed 45° Left Hanger can be used when hanging a 2" x 11-7/8" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2" x 11-7/8" engineer wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 11-1/4" (Height) x 1-5/8" (Outside Flange) x 2-1/8" (Inside Flange) Base:...
Simpson Strong Tie HU216 2 x 16 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...
Simpson Strong Tie HU216 2 x 16 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 12-15/16" (Height) x 2-1/4" (Seat Depth) Fasteners: (18) .162" x 3-1/2" 16d Nails (Header) (8) .148" x 1-1/2" 10d Nails (Joist) HU216 Information and...
The Simpson Strong-Tie 4-1/8" x 11-7/8" MIT4.28/11.88 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...
The Simpson Strong-Tie 4-1/8" x 11-7/8" MIT4.28/11.88 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard...
The Simpson MIU5.12/14 hanger is designed to hang 5" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/14 features positive-angle...
The Simpson MIU5.12/14 hanger is designed to hang 5" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUL2.06/14 Skewed 45° Left Hanger can be used when hanging a 2" x 14" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will...
The Simpson Strong-Tie SUL2.06/14 Skewed 45° Left Hanger can be used when hanging a 2" x 14" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2" x 14" engineered wood joist end may be square or beveled cut. Please Note: This hanger can be used for hanging 2" x 16" engineered wood joist with a required web stiffener. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie 4-1/8" x 14" MIT4.28/14 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...
The Simpson Strong-Tie 4-1/8" x 14" MIT4.28/14 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
The Simpson MIU5.12/16 hanger is designed to hang 5" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/16 features positive-angle...
The Simpson MIU5.12/16 hanger is designed to hang 5" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/16 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUR2.06/9 Skewed 45° Right Hanger can be used when hanging a 2" x 9-1/2" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers...
The Simpson Strong-Tie SUR2.06/9 Skewed 45° Right Hanger can be used when hanging a 2" x 9-1/2" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2" x 9-1/2" engineered wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 9-1/16" (Height) x 1-5/8" (Outside Flange) x 2-1/8" (Inside Flange) Base:...
The Simpson Strong-Tie HU614TF is a hybrid 6 x 14 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing...
The Simpson Strong-Tie HU614TF is a hybrid 6 x 14 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 13" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (18) .162...
Simpson Strong Tie LUS44 4 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...
Simpson Strong Tie LUS44 4 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS44 4 x 4 Hangers are approved for installation with 16D nails only. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 3" (Height) x 2" (Seat Depth) Fastener Options: (4)...