Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong Tie HGUS7.25/14 7-1/4" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material:...
Simpson Strong Tie HGUS7.25/14 7-1/4" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 7-1/4" (Wide) x 12-5/8" (Height) x 4" (Seat Depth) Fastener Options: (66) 16d Nails (Header) (22) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS7.25/14 Information and Installation Instructions. Standard G90...
The Simpson Strong-Tie 3-1/2" x 18" HIT418 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 3-1/2" x 18" HIT418 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. The HIT also features extra triangle holes to allow higher uplift loads. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie HU66TF is a hybrid 6 x 6 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that...
The Simpson Strong-Tie HU66TF is a hybrid 6 x 6 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (10) .162...
Simpson Strong-Tie IUS3.56/16 is used to install 3-1/2" x 16" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS3.56/16 is used to install 3-1/2" x 16" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized- Dimensions: 3-5/8" (Wide) x 16" (Height) x 2" (Seat Depth) Fastener Options: (14) .148 x 3" Nails (Face-Min) (16) .148 x 3" Nails (Face-Max)...
Simpson Strong Tie LUS210-3 2 x 10/12 Triple Double-Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...
Simpson Strong Tie LUS210-3 2 x 10/12 Triple Double-Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210-3 Triple 2 x 10/12 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 4-5/8" (Wide) x 8-3/16"...
The Simpson MIU4.28/11 hanger is designed to hang 4-1/8" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/11 features...
The Simpson MIU4.28/11 hanger is designed to hang 4-1/8" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/11 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUL1.81/9 Skewed 45° Left Hanger can be used when hanging a 1-3/4" x 9-1/4" or 9-1/2" engineered wood joists. The angles nail slots direct nails for proper installation....
The Simpson Strong-Tie SUL1.81/9 Skewed 45° Left Hanger can be used when hanging a 1-3/4" x 9-1/4" or 9-1/2" engineered wood joists. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 1-3/4" x 9-1/4" or 9-1/2" engineered wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-13/16" (Wide) x 9" (Height) x 1-5/8" (Outside Flange) x 2-5/16" (Inside...
Simpson Strong Tie U66 6 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16...
Simpson Strong Tie U66 6 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 5" (Height) x 2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 3" 10d Nails (Joist) U66 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc...
Simpson Strong Tie HU212 2 x 12 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...
Simpson Strong Tie HU212 2 x 12 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 9" (Height) x 2-1/4" (Seat Depth) Fasteners: (10) 16d Nails (6) 10d x 1-1/2" Nails (Joist) HU212 Information and Installation Instructions. Standard G90 Zinc...
Simpson Strong-Tie ITS3.56/9.5 sets a new standard for engineered wood top flange hangers. The ITS3.56/9.5 installs 3-1/2" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange...
Simpson Strong-Tie ITS3.56/9.5 sets a new standard for engineered wood top flange hangers. The ITS3.56/9.5 installs 3-1/2" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the...
Simpson Strong Tie LUS210-3Z ZMax® 2 x 10/12 Triple Double-Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater...
Simpson Strong Tie LUS210-3Z ZMax® 2 x 10/12 Triple Double-Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210-3Z Triple 2 x 10/12 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 4-5/8" (Wide) x...
The Simpson Strong-Tie 3-1/2" x 20" MIT420 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 3-1/2" x 20" MIT420 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson MIU4.28/14 hanger is designed to hang 4-1/8" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/14 features positive-angle...
The Simpson MIU4.28/14 hanger is designed to hang 4-1/8" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUL1.81/11 Skewed 45° Left Hanger can be used when hanging a 1-3/4" x 11-1/4" or 11-7/8" engineered wood joists. The angles nail slots direct nails for proper...
The Simpson Strong-Tie SUL1.81/11 Skewed 45° Left Hanger can be used when hanging a 1-3/4" x 11-1/4" or 11-7/8" engineered wood joists. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 1-3/4" x 11-1/4" or 11-7/8" engineer wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-13/16" (Wide) x 11" (Height) x 1-5/8" (Outside Flange) x 2-5/16"...
Simpson Strong Tie U66R Rough 6 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U66R Rough 6 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 6" (Wide) x 5" (Height) x 2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 3" 10d Nails (Joist) U66R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...
The Simpson Strong-Tie 3-1/2" x 20" HIT420 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 3-1/2" x 20" HIT420 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. The HIT also features extra triangle holes to allow higher uplift loads. Material: 16 gauge Finish: Standard G90 Galvanized...