Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie SUL214 Skewed Left 2 x 14 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists...
The Simpson Strong-Tie SUL214 Skewed Left 2 x 14 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 14 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 10" (Height) x 1-1/8" (Outside Flange) x 1-5/16" (Inside Flange) Fastener Options : (12) .162 x 3-1/2" 16d Nails (Face) (12) .148 x 1-1/2"...
Simpson Strong Tie U410R Rough 4 x 10/12 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U410R Rough 4 x 10/12 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 4-1/16" (Wide) x 8-1/8" (Height) x 2" (Seat Depth) Fastener Options: (14) .162 x 3-1/2" 16d Nails (Header) (6) .148 x 3" 10d Nails (Joist) U410R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
Simpson Strong Tie HGUS7.25/10 7-1/4" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material:...
Simpson Strong Tie HGUS7.25/10 7-1/4" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 7-1/4" (Wide) x 8-5/8" (Height) x 4" (Seat Depth) Fastener Options: (46) 16d Nails (Header) (16) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS7.25/10 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
The Simpson Strong-Tie HU414TF is a hybrid 4 x 14 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing...
The Simpson Strong-Tie HU414TF is a hybrid 4 x 14 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 13" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (18) .162...
Simpson Strong Tie HUC210-4 Quad 2 x 10 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HUC210-4 Quad 2 x 10 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC210-4 hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where outside flanges will not work. Material:...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.56/14 sets a new standard for engineered wood top flange hangers. The ITS2.56/14 installs 2-1/2" or 2-9/16" x 14"...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.56/14 sets a new standard for engineered wood top flange hangers. The ITS2.56/14 installs 2-1/2" or 2-9/16" x 14" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from...
Simpson Strong-Tie IUS3.56/11.88 is used to install 3-1/2" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging...
Simpson Strong-Tie IUS3.56/11.88 is used to install 3-1/2" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x 3" Nails (Face) IUS3.56/11.88 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...
Simpson Strong Tie LUS210-2SS Type 316L Stainless Steel 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for...
Simpson Strong Tie LUS210-2SS Type 316L Stainless Steel 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210-2SS Double 2 x 10/12 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: Type 316L Stainless Steel Galvanized...
The Simpson Strong-Tie 3-1/2" x 16" MIT416 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 3-1/2" x 16" MIT416 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUR214 Skewed Right 2 x 14 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate...
The Simpson Strong-Tie SUR214 Skewed Right 2 x 14 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 14 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 10" (Height) x 1-1/8" (Outside Flange) x 1-5/16" (Inside Flange) Fastener Options : (12) .162 x 3-1/2" 16d Nails (Face) (12) .148 x...
Simpson Strong Tie U414 4 x 14/16 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material:...
Simpson Strong Tie U414 4 x 14/16 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 10" (Height) x 2" (Seat Depth) Fastener Options: (16) .162 x 3-1/2" 16d Nails (Header) (6) .148 x 3" 10d Nails (Joist) U414 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...
Simpson Strong Tie HGUS7.25/12 7-1/4" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material:...
Simpson Strong Tie HGUS7.25/12 7-1/4" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 7-1/4" (Wide) x 10-5/8" (Height) x 4" (Seat Depth) Fastener Options: (56) 16d Nails (Header) (20) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS7.25/12 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...
Simpson Strong-Tie ITS2.56/16 sets a new standard for engineered wood top flange hangers. The ITS2.56/16 installs 2-1/2" or 2-9/16" x 16" I-Joists faster and uses less nails than any other EWP top...
Simpson Strong-Tie ITS2.56/16 sets a new standard for engineered wood top flange hangers. The ITS2.56/16 installs 2-1/2" or 2-9/16" x 16" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in...
Simpson Strong-Tie IUS3.56/14 is used to install 3-1/2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS3.56/14 is used to install 3-1/2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x 3" Nails (Face-Min) (14) .148 x 3" Nails (Face-Max)...
The Simpson Strong-Tie 3-1/2" x 18" MIT418 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 3-1/2" x 18" MIT418 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson MIU4.28/9 hanger is designed to hang 4-1/8" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/9 features...
The Simpson MIU4.28/9 hanger is designed to hang 4-1/8" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/9 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...