Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson MIU3.56/20 hanger is designed to hang 3-1/2" x 20" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/20 features positive-angle...
The Simpson MIU3.56/20 hanger is designed to hang 3-1/2" x 20" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/20 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUR210-2 Skewed Right Double 2 x 10/12 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally...
The Simpson Strong-Tie SUR210-2 Skewed Right Double 2 x 10/12 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist ends may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 8-11/16" (Height) x 1-7/16" (Outside Flange) x 2-3/8" (Inside Flange) Fastener Options : (14) .162 x 3-1/2" Nails...
Simpson Strong Tie U44R Rough 4 x 4 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U44R Rough 4 x 4 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 4-1/16" (Wide) x 2-5/8" (Height) x 2" (Seat Depth) Fastener Options: (4) .162 x 3-1/2" 16d Nails (Header) (2) .148 x 3" 10d Nails (Joist) U44R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...
Simpson Strong Tie HUC210-2SS Stainless Steel Double 2 x 10 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed...
Simpson Strong Tie HUC210-2SS Stainless Steel Double 2 x 10 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC210-2SS Stainless Steel hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where...
Simpson Strong Tie HUCQ612Z-SDSG ZMax® 5-1/2" Wide 6 x 12 Heavy Duty Beam Hangers come with the required SDS screws to reach the load values you require. HUCQ612Z-SDSG ZMax® hangers with...
Simpson Strong Tie HUCQ612Z-SDSG ZMax® 5-1/2" Wide 6 x 12 Heavy Duty Beam Hangers come with the required SDS screws to reach the load values you require. HUCQ612Z-SDSG ZMax® hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: ZMax® G-185 Galvanized Dimensions: 5-1/2" (Wide) x 11" (Height) x 3" (Seat Depth) Included Fasteners: (14) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.56/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.56/9.5 installs 2-1/2" or 2-9/16" x 9-1/2"...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.56/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.56/9.5 installs 2-1/2" or 2-9/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses...
Simpson Strong-Tie IUS2.56/14 is used to install 2-1/2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS2.56/14 is used to install 2-1/2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-5/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x 3" Nails (Face-Min) (14) .148 x 3" Nails (Face-Max)...
Simpson Strong Tie LUS210Z ZMax® 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength....
Simpson Strong Tie LUS210Z ZMax® 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210Z 2 x 10/12 Hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-9/16" (Wide) x 7-13/16" (Height)...
The Simpson Strong-Tie SUR210-2Z ZMax® Skewed Right Double 2 x 10/12 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will...
The Simpson Strong-Tie SUR210-2Z ZMax® Skewed Right Double 2 x 10/12 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist ends may be square or beveled cut. Material: 16 gauge Finish: ZMax® G185 Galvanized Dimensions: 3-1/8" (Wide) x 8-11/16" (Height) x 1-7/16" (Outside Flange) x 2-3/8" (Inside Flange) Fastener Options : (14) .162 x 3-1/2"...
Simpson Strong Tie U46 4 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16...
Simpson Strong Tie U46 4 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 4-7/8" (Height) x 2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 3" 10d Nails (Joist) U46 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...
The Simpson Strong-Tie HSUR210-2 Skewed Right Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally...
The Simpson Strong-Tie HSUR210-2 Skewed Right Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist end may be square or beveled cut. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 8-11/16" (Height) x 1-1/4" (Outside Flange) x 2-3/16" (Inside Flange) Fastener Options : (20) .162 x 3-1/2" 16d Nails...
Simpson Strong Tie HU210-3 Triple 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HU210-3 Triple 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU210-3 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 4-11/16" (Wide) x 8-1/16" (Height) x 2-1/2" (Seat Depth)...
The Simpson Strong-Tie HU412TF is a hybrid 4 x 12 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing...
The Simpson Strong-Tie HU412TF is a hybrid 4 x 12 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 11" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (16) .162...
Simpson Strong-Tie ITS2.56/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.56/11.88 installs 2-1/2" or 2-9/16" x 11-7/8" I-Joists faster and uses less nails than any other...
Simpson Strong-Tie ITS2.56/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.56/11.88 installs 2-1/2" or 2-9/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2"...
Simpson Strong-Tie IUS2.56/16 is used to install 2-1/2" x 16" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS2.56/16 is used to install 2-1/2" x 16" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-5/8" (Wide) x 16" (Height) x 2" (Seat Depth) Fastener Options : (14) .148 x 3" Nails (Face-Min) (16) .148 x 3" Nails (Face-Max)...
Simpson Strong Tie LUS210SS Type 316L Stainless Steel 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for...
Simpson Strong Tie LUS210SS Type 316L Stainless Steel 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210SS Stainless Steel 2 x 10/12 Hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Type 316L Stainless Steel Dimensions:...