Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie HUC48TF is a hybrid 4 x 8 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with two...
The Simpson Strong-Tie HUC48TF is a hybrid 4 x 8 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with two concealed flanges for end-of-wall or corner installation. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 7-1/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (12)...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/14 sets a new standard for engineered wood top flange hangers. The ITS2.37/14 installs 2-5/16" x 14" I-Joists...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/14 sets a new standard for engineered wood top flange hangers. The ITS2.37/14 installs 2-5/16" x 14" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to...
Simpson Strong Tie LUS28-3Z Triple ZMax® 2 x 8 Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also...
Simpson Strong Tie LUS28-3Z Triple ZMax® 2 x 8 Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS28-3Z Triple 2 x 8 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 4-5/8" (Wide) x 6-1/4" (Height) x 2"...
The Simpson Strong-Tie 2-1/2" x 18" MIT318 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 2-1/2" x 18" MIT318 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson MIU3.56/14 hanger is designed to hang 3-1/2" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/14 features positive-angle...
The Simpson MIU3.56/14 hanger is designed to hang 3-1/2" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUL210-2 Skewed Left Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally...
The Simpson Strong-Tie SUL210-2 Skewed Left Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist ends may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 8-11/16" (Height) x 1-7/16" (Outside Flange) x 2-3/8" (Inside Flange) Fastener Options : (14) .162 x 3-1/2" 16d Nails...
Simpson Strong Tie HGUS5.50/12 5-1/2" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material:...
Simpson Strong Tie HGUS5.50/12 5-1/2" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 10-1/2" (Height) x 4" (Seat Depth) Fastener Options: (56) 16d Nails (Header) (20) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS5.50/12 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...
Simpson Strong Tie HU210-2 Double 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HU210-2 Double 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU210-2 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 8-13/16" (Height) x 2-1/2" (Seat Depth)...
Simpson Strong Tie HUCQ610-SDS 5-1/2" Wide 6 x 10 Heavy Duty Beam Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to...
Simpson Strong Tie HUCQ610-SDS 5-1/2" Wide 6 x 10 Heavy Duty Beam Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x 2-1/2" Screws (Joist) HUCQ610-SDS...
Simpson Strong-Tie ITS2.37/16 sets a new standard for engineered wood top flange hangers. The ITS2.37/16 installs 2-5/16" x 16" I-Joists faster and uses less nails than any other EWP top flange...
Simpson Strong-Tie ITS2.37/16 sets a new standard for engineered wood top flange hangers. The ITS2.37/16 installs 2-5/16" x 16" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the joist...
Simpson Strong-Tie IUS2.56/9.5 is used to install 2-1/2" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS2.56/9.5 is used to install 2-1/2" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-5/8" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) .148 x 3" Nails (Face) IUS2.56/9.5 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
The Simpson Strong-Tie 2-1/2" x 20" MIT320 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 2-1/2" x 20" MIT320 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson MIU3.56/16 hanger is designed to hang 3-1/2" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/16 features positive-angle...
The Simpson MIU3.56/16 hanger is designed to hang 3-1/2" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/16 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUL210-2Z ZMax® Skewed Left Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will...
The Simpson Strong-Tie SUL210-2Z ZMax® Skewed Left Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist ends may be square or beveled cut. Material: 16 gauge Finish: ZMax® G185 Galvanized Dimensions: 3-1/8" (Wide) x 8-11/16" (Height) x 1-7/16" (Outside Flange) x 2-3/8" (Inside Flange) Fastener Options : (14) .162 x 3-1/2" 16d...
Simpson Strong Tie HGUS5.50/14 5-1/2" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material:...
Simpson Strong Tie HGUS5.50/14 5-1/2" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 12-1/2" (Height) x 4" (Seat Depth) Fastener Options: (66) 16d Nails (Header) (22) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS5.50/14 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...
The Simpson Strong-Tie 2-1/2" x 20" HIT320 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 2-1/2" x 20" HIT320 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. The HIT also features extra triangle holes to allow higher uplift loads. Material: 16 gauge Finish: Standard G90 Galvanized...