Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson MIU2.56/18 hanger is designed to hang 2-1/2" x 18" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/18 features positive-angle...
The Simpson MIU2.56/18 hanger is designed to hang 2-1/2" x 18" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/18 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUR210 Skewed Right 2 x 10/12 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate...
The Simpson Strong-Tie SUR210 Skewed Right 2 x 10/12 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 8-1/8" (Height) x 1-1/8" (Outside Flange) x 1-5/16" (Inside Flange) Fastener Options : (10) .162 x 3-1/2" 16d Nails (Face) (10)...
Simpson Strong Tie U34 3 x 4 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16...
Simpson Strong Tie U34 3 x 4 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-9/16" (Wide) x 3-3/8" (Height) x 2" (Seat Depth) Fastener Options: (4) .162" x 3-1/2" 16d Nails (Header) (2) .148" x 1-1/2" 10d Nails (Joist) U34 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...
Simpson Strong Tie HGUS5.25/12 5-1/8" Wide Glulam Hangers features double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12...
Simpson Strong Tie HGUS5.25/12 5-1/8" Wide Glulam Hangers features double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/4" (Wide) x 10-9/16" (Height) x 4" (Seat Depth) Fastener Options: (56) 16d Nails (Header) (20) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS5.25/12 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
The Simpson Strong-Tie HUC46TF is a hybrid 4 x 6 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with two...
The Simpson Strong-Tie HUC46TF is a hybrid 4 x 6 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with two concealed flanges for end-of-wall or corner installation. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (10)...
Simpson Strong Tie HUS410 4 x 10/12 Double Shear Beam Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also...
Simpson Strong Tie HUS410 4 x 10/12 Double Shear Beam Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 8-15/16" (Height) x 2" (Seat Depth) Fastener Options: (8) 16d Nails or SD10212 Screws (Header) (8) 16d Nails...
Simpson Strong-Tie ITS2.37/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.37/11.88 installs 2-5/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top...
Simpson Strong-Tie ITS2.37/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.37/11.88 installs 2-5/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in...
Simpson Strong-Tie IUS2.37/14 is used to install 2-5/16" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS2.37/14 is used to install 2-5/16" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-7/16" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS2.37/14 Information and...
Simpson Strong Tie LUS28-2Z ZMax® 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...
Simpson Strong Tie LUS28-2Z ZMax® 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS28-2Z Double 2 x 8 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 3-1/8" (Wide) x 7" (Height) x 2"...
The Simpson Strong-Tie 2-1/2" or 2-9/16" x 14" MIT314 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...
The Simpson Strong-Tie 2-1/2" or 2-9/16" x 14" MIT314 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
The Simpson Strong-Tie SUR210Z Skewed Right 2 x 10/12 joist hangers with ZMax® coating are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will...
The Simpson Strong-Tie SUR210Z Skewed Right 2 x 10/12 joist hangers with ZMax® coating are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist end may be square or beveled cut. ZMax coating provides additional corrosion protection when required. Material: 16 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-9/16" (Wide) x 8-1/8" (Height) x 1-1/8" (Outside...
Simpson Strong Tie U36 3 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16...
Simpson Strong Tie U36 3 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-9/16" (Wide) x 5-3/8" (Height) x 2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 3" 10d Nails (Joist) U36 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...
Simpson Strong Tie HUCQ5.25/9-SDS Heavy Duty 5-1/8" Glulam Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at...
Simpson Strong Tie HUCQ5.25/9-SDS Heavy Duty 5-1/8" Glulam Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x 2-1/2" Screws (Joist) HUCQ5.25/9 Information...
Simpson Strong Tie HUS412 4 x 12/14 Double Shear Beam Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also...
Simpson Strong Tie HUS412 4 x 12/14 Double Shear Beam Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 10-1/2" (Height) x 2" (Seat Depth) Fastener Options: (10) 16d Nails or SD10212 Screws (Header) (10) 16d Nails...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.37/11.88 installs 2-5/16" x 11-7/8"...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.37/11.88 installs 2-5/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/14 is used to install 2-5/16" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/14 is used to install 2-5/16" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-7/16" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (10)...