Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong Tie HUS46 4 x 6 Double Shear Beam Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...
Simpson Strong Tie HUS46 4 x 6 Double Shear Beam Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 5" (Height) x 2" (Seat Depth) Fastener Options: (4) 16d Nails or SD10212 Screws(Header) (4) 16d Nails (Joist)...Shorter Nails...
Simpson Strong-Tie ITS2.37/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.37/9.5 installs 2-5/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange...
Simpson Strong-Tie ITS2.37/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.37/9.5 installs 2-5/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the...
Simpson Strong-Tie IUS2.37/11.88 is used to install 2-5/16" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging...
Simpson Strong-Tie IUS2.37/11.88 is used to install 2-5/16" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-7/16" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS2.37/11.88 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...
Simpson Strong-Tie LUC210SS Type 316L Stainless Steel 2 x 10/12 Concealed Flange Joist Hanger are ideal for end of ledger, header or post conditions. The LUC210SS also provides cleaner lines for...
Simpson Strong-Tie LUC210SS Type 316L Stainless Steel 2 x 10/12 Concealed Flange Joist Hanger are ideal for end of ledger, header or post conditions. The LUC210SS also provides cleaner lines for exposed conditions such as overhead decks. Material: 18 Gauge Finish:Type 316L Stainless Steel Dimensions: 1-9/16" (Wide) x 7-3/4" (Height) x 1-3/4" (Seat Depth) Fastener Options: (10) .162 x 3-1/2" 16d Nails (Header) (6) .148 x 1-1/2" 10d Nails (Joist) Strong Drive® SD9112 #9 x 1-1/2" Structural...
Simpson Strong Tie LUS28SS Type 316L Stainless Steel 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for...
Simpson Strong Tie LUS28SS Type 316L Stainless Steel 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS28SS 2 x 8 Hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Type 316L Stainless Steel Dimensions: 1-9/16" (Wide) x 6-5/8"...
The Simpson Strong-Tie 2-1/2" or 2-9/16" x 11-7/8" MIT311.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...
The Simpson Strong-Tie 2-1/2" or 2-9/16" x 11-7/8" MIT311.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard...
The Simpson MIU2.56/16 hanger is designed to hang 2-1/2" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/16 features positive-angle...
The Simpson MIU2.56/16 hanger is designed to hang 2-1/2" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/16 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUL210SS Type 316L Stainless Steel Skewed Left 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers...
The Simpson Strong-Tie SUL210SS Type 316L Stainless Steel Skewed Left 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist end may be square or beveled cut. Stainless Steel provides additional corrosion protection when required. Material: 16 gauge Finish: Type 316L Stainless Steel Dimensions: 1-9/16" (Wide) x 8-1/8" (Height) x 1-1/8"...
Simpson Strong Tie HGUS5.25/10 5-1/8" Wide Glulam Hangers features double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12...
Simpson Strong Tie HGUS5.25/10 5-1/8" Wide Glulam Hangers features double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/4" (Wide) x 9-1/16" (Height) x 4" (Seat Depth) Fastener Options: (46) 16d Nails (Header) (16) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS5.25/10 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
The Simpson Strong-Tie HU46TF is a hybrid 4 x 6 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that...
The Simpson Strong-Tie HU46TF is a hybrid 4 x 6 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (10)...
Simpson Strong Tie HUC28-4 Quad 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...
Simpson Strong Tie HUC28-4 Quad 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC28-4 hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where outside flanges will not work. Material: 14...
Simpson Strong Tie HUCQ412SS-SDS Stainless Steel 3-9/16" Wide 4 x 12 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ412SS-SDS Stainless Steel...
Simpson Strong Tie HUCQ412SS-SDS Stainless Steel 3-9/16" Wide 4 x 12 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ412SS-SDS Stainless Steel hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Type 316L Stainless Steel Dimensions: 3-9/16" (Wide) x 11" (Height) x 3" (Seat Depth) Included Fasteners: (14) SDS 1/4" x 2-1/2" Screws (Header) (6)...
Simpson Strong Tie HUS48 4 x 8 Double Shear Beam Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...
Simpson Strong Tie HUS48 4 x 8 Double Shear Beam Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 6-15/16" (Height) x 2" (Seat Depth) Fastener Options: (6) 16d Nails or SD10212 Screws (Header) (6) 16d Nails (Joist)...Shorter...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.37/9.5 installs 2-5/16" x 9-1/2" I-Joists...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.37/9.5 installs 2-5/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/11.88 is used to install 2-5/16" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/11.88 is used to install 2-5/16" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-7/16" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS2.37/11.88 Information and Installation...
Simpson Strong Tie LUS28-2 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...
Simpson Strong Tie LUS28-2 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS28-2 Double 2 x 8 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 7" (Height) x 2" (Seat Depth)...