Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie SUR26-2 Skewed Right Double 2 x 6/8 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally...
The Simpson Strong-Tie SUR26-2 Skewed Right Double 2 x 6/8 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 4-15/16" (Height) x 1-7/16" (Outside Flange) x 2-3/8" (Inside Flange) Fastener Options : (8) .162 x 3-1/2" 16d Nails (Face) (4)...
Simpson Strong Tie U210R 2 x 10/12 Rough Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U210R 2 x 10/12 Rough Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2" (Wide) x 9-1/8" (Height) x 2" (Seat Depth) Fastener Options: (14) .162" x 3-1/2" 16d Nails (Header) (6) .148" x 1-1/2" 10d Nails (Joist) U210R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
Simpson Strong Tie HGUS48 4 x 8 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge...
Simpson Strong Tie HGUS48 4 x 8 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/8" (Wide) x 7-1/16" (Height) x 4" (Seat Depth) Fastener Options: (36) 16d Nails (Header) (12) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS48 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...
The Simpson Strong-Tie HSUR26-2 Skewed Right Double 2 x 6/8 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally...
The Simpson Strong-Tie HSUR26-2 Skewed Right Double 2 x 6/8 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 4-15/16" (Height) x 1-1/4" (Outside Flange) x 2-3/16" (Inside Flange) Fastener Options : (12) .162 x 3-1/2" 16d Nails (Face)...
The Simpson Strong-Tie HU212-2TF is a hybrid 2 x 12-2 double hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features...
The Simpson Strong-Tie HU212-2TF is a hybrid 2 x 12-2 double hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 11" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: ...
Simpson Strong Tie HU28-2 Double 2 x 8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HU28-2 Double 2 x 8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU28-2 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 7" (Height) x 2-1/2" (Seat Depth) Fastener...
Simpson Strong Tie HUCQ410-SDS 3-9/16" Wide 4 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ410-SDS hangers with concealed flanges are...
Simpson Strong Tie HUCQ410-SDS 3-9/16" Wide 4 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ410-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x 2-1/2" Screws (Joist)...
Simpson Strong Tie HUS210-2 Double 2 x 10 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...
Simpson Strong Tie HUS210-2 Double 2 x 10 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 9-3/16" (Height) x 2" (Seat Depth) Fastener Options: (8) 16d Nails or SD10212 Screws (Header) (8) 16d Nails...
Simpson Strong-Tie ITS2.06/14 sets a new standard for engineered wood top flange hangers. The ITS2.06/14 installs 2" or 2-1/16" x 14" I-Joists faster and uses less nails than any other EWP top...
Simpson Strong-Tie ITS2.06/14 sets a new standard for engineered wood top flange hangers. The ITS2.06/14 installs 2" or 2-1/16" x 14" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the...
Simpson Strong-Tie IUS2.06/16 is used to install 2" x 16" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs....
Simpson Strong-Tie IUS2.06/16 is used to install 2" x 16" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 16" (Height) x 2" (Seat Depth) Fastener Options : (14) .148 x 3" Nails (Face-Min) (16) .148 x 3" Nails (Face-Max)...
Simpson Strong-Tie LU210 2 x 10 Joist Hangers are an economical and time saving solution to securely installing 2 x 10 joists to a wood ledger or beam. You can install LU210 hangers with with 10d or...
Simpson Strong-Tie LU210 2 x 10 Joist Hangers are an economical and time saving solution to securely installing 2 x 10 joists to a wood ledger or beam. You can install LU210 hangers with with 10d or 16d nails depending on the load value you are trying to achieve. LU210 joist hangers are also approved for installation with Simpson Strong-Tie SD Structural Connector Screws. LU210 Hangers can also be used with 2 x 12 and 2 x 14 joists when required. Material: 20 gauge Finish: Standard G90...
The Simpson Strong-Tie 2-5/16" x 18" MIT3518 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 2-5/16" x 18" MIT3518 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
Simpson Strong Tie U210-2 Double 2 x 10/12 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U210-2 Double 2 x 10/12 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 8-1/2" (Height) x 2" (Seat Depth) Fastener Options: (14) .162" x 3-1/2" 16d Nails (Header) (6) .148" x 3" 10d Nails (Joist) U210-2 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...
Simpson Strong Tie HGUS410 4 x 10 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge...
Simpson Strong Tie HGUS410 4 x 10 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/8" (Wide) x 9-1/16" (Height) x 4" (Seat Depth) Fastener Options: (46) 16d Nails (Header) (16) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS410 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...
The Simpson Strong-Tie HU212-3TF is a hybrid 2 x 12-3 triple hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features...
The Simpson Strong-Tie HU212-3TF is a hybrid 2 x 12-3 triple hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 4-11/16" (Wide) x 11" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top...
Simpson Strong Tie HUC28-2 Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HUC28-2 Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC28-2 hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where outside flanges will not work. Material:...