Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong-Tie ITS2.06/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.06/11.88 installs 2" or 2-1/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP...
Simpson Strong-Tie ITS2.06/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.06/11.88 installs 2" or 2-1/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2"...
Simpson Strong-Tie IUS2.06/14 is used to install 2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs....
Simpson Strong-Tie IUS2.06/14 is used to install 2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x 3" Nails (Face-Min) (14) .148 x 3" Nails (Face-Max)...
Simpson Strong-Tie LU28R-18 rough 2 x 8 Joist Hangers are an economical and time saving solution to securely installing rough 2 x 8 joists to a wood ledger or beam. You can install LU28R-18 hangers...
Simpson Strong-Tie LU28R-18 rough 2 x 8 Joist Hangers are an economical and time saving solution to securely installing rough 2 x 8 joists to a wood ledger or beam. You can install LU28R-18 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2" (Wide) x 6-3/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" 16d Nails (Header) (6) .148 x 1-1/2" 10d...
Simpson Strong Tie LUS26-2SS Type 316L Stainless Steel 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for...
Simpson Strong Tie LUS26-2SS Type 316L Stainless Steel 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26-2SS Double 2 x 6 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: Type 316L Stainless Steel Dimensions: 3-1/8" (Wide) x...
The Simpson MIU2.37/16 hanger is designed to hang 2-5/16" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.37/16 features...
The Simpson MIU2.37/16 hanger is designed to hang 2-5/16" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.37/16 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
Save by Purchasing a Quantity of 18 Boxes (900 Pieces)! Simpson Strong Tie U210 2 x 10/12 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain...
Save by Purchasing a Quantity of 18 Boxes (900 Pieces)! Simpson Strong Tie U210 2 x 10/12 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 7-13/16" (Height) x 2" (Seat Depth) Fastener Options: (10) .162" x 3-1/2" 16d Nails (Header) (6) .148" x 1-1/2" 10d Nails (Joist) U210 Information and Installation...
The Simpson Strong-Tie BA2.1/11.88 Top Flange Hanger is designed for 2" x 11-7/8" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn...
The Simpson Strong-Tie BA2.1/11.88 Top Flange Hanger is designed for 2" x 11-7/8" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top flanges...
Simpson Strong Tie HGUS46 4 x 6 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge...
Simpson Strong Tie HGUS46 4 x 6 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/8" (Wide) x 4-7/16" (Height) x 4" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS46 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...
The Simpson Strong-Tie HU212TF is a hybrid 2 x 12 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing...
The Simpson Strong-Tie HU212TF is a hybrid 2 x 12 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 11" (Height) x 2-1/4" (Seat Depth) x 2-7/16" (Top Flange) Fasteners: (14)...
Save by Purchasing a Quantity of 9 Boxes (450 Pieces)! Simpson Strong Tie HU28 2 x 8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist...
Save by Purchasing a Quantity of 9 Boxes (450 Pieces)! Simpson Strong Tie HU28 2 x 8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 5-1/4" (Height) x 2-1/4" (Seat Depth) Fasteners: (6) .162 x 3-1/2" (16d) Nails (Header) (4) .148 x 1-1/2"...
Simpson Strong Tie HUS210Z ZMax® 2 x 10 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...
Simpson Strong Tie HUS210Z ZMax® 2 x 10 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 16 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-5/8" (Wide) x 9" (Height) x 3" (Seat Depth) Fastener Options: (30) 16d Nails or SD10212 Screws(Header) (10) 16d Nails...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.06/11.88 installs 2" or 2-1/16" x...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.06/11.88 installs 2" or 2-1/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.06/14 is used to install 2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.06/14 is used to install 2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x...
Simpson Strong Tie LUS26-3 2 x 6 Triple Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the...
Simpson Strong Tie LUS26-3 2 x 6 Triple Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26-3 Triple 2 x 6 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 4-5/8" (Wide) x 4-1/8" (Height) x 2" (Seat Depth)...
The Simpson Strong-Tie 2-5/16" x 16" MIT3516 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 2-5/16" x 16" MIT3516 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
The Simpson MIU2.37/18 hanger is designed to hang 2-5/16" x 18" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.37/18 features...
The Simpson MIU2.37/18 hanger is designed to hang 2-5/16" x 18" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.37/18 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...