Login/Register
Shopping Cart
OR
Simpson Strong-Tie H10A-2 Hurricane Tie for connection a double top plate to double 2x rafters or trusses. The H10A-2 uses (18) 10d .148" x 1-1/2" joist nails. Material: 18 Gauge Finish: Standard...
Simpson Strong-Tie H10A-2 Hurricane Tie for connection a double top plate to double 2x rafters or trusses. The H10A-2 uses (18) 10d .148" x 1-1/2" joist nails. Material: 18 Gauge Finish: Standard G90 Zinc Fastener Options: (18) 10d .148" x 1-1/2" H10A-2 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...
The Simpson Strong-Tie MTS30Z ZMax® 1-1/4" Wide x 30" Long Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the...
The Simpson Strong-Tie MTS30Z ZMax® 1-1/4" Wide x 30" Long Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS30 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. ZMax® coating provides additional corrosion resistance when required....
The Simpson Strong-Tie HU66TF is a hybrid 6 x 6 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that...
The Simpson Strong-Tie HU66TF is a hybrid 6 x 6 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (10) .162...
Simpson Strong Tie HGUS7.25/14 7-1/4" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material:...
Simpson Strong Tie HGUS7.25/14 7-1/4" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 7-1/4" (Wide) x 12-5/8" (Height) x 4" (Seat Depth) Fastener Options: (66) 16d Nails (Header) (22) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS7.25/14 Information and Installation Instructions. Standard G90...
Simpson Strong-Tie CCQ68SDS2.5 Column Caps provide a high capacity connection between a 6x beam and a 8x post. CCQ68SDS2.5 Column Caps should be used when the beam extends through the post. Each...
Simpson Strong-Tie CCQ68SDS2.5 Column Caps provide a high capacity connection between a 6x beam and a 8x post. CCQ68SDS2.5 Column Caps should be used when the beam extends through the post. Each CCQ68SDS2.5 Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call our sales department...
The THD501300H 1/2" x 13" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...
The THD501300H 1/2" x 13" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...
Simpson Strong-Tie IUS3.56/16 is used to install 3-1/2" x 16" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS3.56/16 is used to install 3-1/2" x 16" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized- Dimensions: 3-5/8" (Wide) x 16" (Height) x 2" (Seat Depth) Fastener Options: (14) .148 x 3" Nails (Face-Min) (16) .148 x 3" Nails (Face-Max)...
Simpson Strong-Tie CC98 Column Caps provide a high capacity connection between a 8-3/4" GluLam beam and a 8x post. CC98 Column Caps should be used when the 8-3/4" beam extends through the 8x post....
Simpson Strong-Tie CC98 Column Caps provide a high capacity connection between a 8-3/4" GluLam beam and a 8x post. CC98 Column Caps should be used when the 8-3/4" beam extends through the 8x post. Please Note: This column cap is also available in powder coat, Hot Dipped Galvanized and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 8-7/8" (Beam) x 7-1/2" (Post) x 13"...
Simpson Strong Tie HU212 2 x 12 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...
Simpson Strong Tie HU212 2 x 12 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 9" (Height) x 2-1/4" (Seat Depth) Fasteners: (10) 16d Nails (6) 10d x 1-1/2" Nails (Joist) HU212 Information and Installation Instructions. Standard G90 Zinc...
Simpson Strong-Tie ITS3.56/9.5 sets a new standard for engineered wood top flange hangers. The ITS3.56/9.5 installs 3-1/2" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange...
Simpson Strong-Tie ITS3.56/9.5 sets a new standard for engineered wood top flange hangers. The ITS3.56/9.5 installs 3-1/2" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the...
The THD501400H 1/2" x 14" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...
The THD501400H 1/2" x 14" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...
Simpson Strong-Tie ECCLRQ666SDS End Corner Column Caps provide a right connection between (2) 6x beams and (1) 6 x 6 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x...
Simpson Strong-Tie ECCLRQ666SDS End Corner Column Caps provide a right connection between (2) 6x beams and (1) 6 x 6 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 5-1/2" (Beams) x 5-1/2" (Posts) Included Fasteners: (34) 1/4" x 2-1/2" SDS Screws ECCLLQ666SDS Information and Installation Instructions. Gray...
The Simpson Strong-Tie HTS30 1-1/4" x 30" Heavy Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a...
The Simpson Strong-Tie HTS30 1-1/4" x 30" Heavy Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The HTS30 has a small bend section to reduce interference at the transition points between the two members. HTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 30" (Length) Fasteners:...
Simpson Strong-Tie H10A-2Z ZMax® Hurricane Tie for connection a double top plate to double 2x rafters or trusses. The H10A-2Z ZMax® uses (18) 10d .148" x 1-1/2" joist nails. Material: 18...
Simpson Strong-Tie H10A-2Z ZMax® Hurricane Tie for connection a double top plate to double 2x rafters or trusses. The H10A-2Z ZMax® uses (18) 10d .148" x 1-1/2" joist nails. Material: 18 Gauge Finish: ZMax® G-185 Coating Fastener Options: (18) 10d .148" x 1-1/2" H10A-2Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than the standard hot-dip galvanized coating...
The Simpson Strong-Tie PAB7-18-HDG 7/8" x 18" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems...
The Simpson Strong-Tie PAB7-18-HDG 7/8" x 18" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department...
Simpson Strong Tie LUS210-3Z ZMax® 2 x 10/12 Triple Double-Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater...
Simpson Strong Tie LUS210-3Z ZMax® 2 x 10/12 Triple Double-Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210-3Z Triple 2 x 10/12 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 4-5/8" (Wide) x...
The Simpson Strong-Tie SUL1.81/11 Skewed 45° Left Hanger can be used when hanging a 1-3/4" x 11-1/4" or 11-7/8" engineered wood joists. The angles nail slots direct nails for proper...
The Simpson Strong-Tie SUL1.81/11 Skewed 45° Left Hanger can be used when hanging a 1-3/4" x 11-1/4" or 11-7/8" engineered wood joists. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 1-3/4" x 11-1/4" or 11-7/8" engineer wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-13/16" (Wide) x 11" (Height) x 1-5/8" (Outside Flange) x 2-5/16"...
Simpson Strong Tie U66R Rough 6 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U66R Rough 6 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 6" (Wide) x 5" (Height) x 2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 3" 10d Nails (Joist) U66R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...
The Simpson Strong-Tie 3-1/2" x 20" MIT420 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 3-1/2" x 20" MIT420 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie THDB62600H4SS Type 304 Stainless Steel 5/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THDB62600H4SS Type 304 Stainless Steel 5/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson MIU4.28/14 hanger is designed to hang 4-1/8" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/14 features positive-angle...
The Simpson MIU4.28/14 hanger is designed to hang 4-1/8" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie THDB62600H6SS Type 316 Stainless Steel 5/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THDB62600H6SS Type 316 Stainless Steel 5/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
Simpson Strong-Tie ECCLRQ666SDSHDG Hot Dipped Galvanized End Corner Column Caps provide a right connection between (2) 6x beams and (1) 6 x 6 posts when both beams end at the post. Install Simpson...
Simpson Strong-Tie ECCLRQ666SDSHDG Hot Dipped Galvanized End Corner Column Caps provide a right connection between (2) 6x beams and (1) 6 x 6 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 5-1/2" (Beams) x 5-1/2" (Posts) Included Fasteners: (34) 1/4" x 2-1/2" SDS Screws ECCLLQ666SDS Information and...
The Simpson Strong-Tie 3-1/2" x 20" HIT420 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 3-1/2" x 20" HIT420 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. The HIT also features extra triangle holes to allow higher uplift loads. Material: 16 gauge Finish: Standard G90 Galvanized...