Login/Register
Shopping Cart
OR
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.06/11.88 is used to install 2" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS2.06/11.88 Information and Installation...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.06/9.5 installs 2" or 2-1/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from...
Made In USA! The Occidental Leather® B5080DB Black Pro Framer™ Nail Bag Set is designed for the serious carpenter who wants to make sure his tools are always close when they are needed. The Occidental Pro Framer set is fine-tuned for optimum efficiency and comfort so you can come to work every day knowing you won't be wasting time and energy fighting your tool bag. The Pro Leather Series is constructed of premium top grain cow hides tanned to our stringent specifications with a...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH48-8/3 Girder Hangers is used to connect a 4 x 8 girder to a 8" foundation wall using 3x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 4-5/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH48-8/3 Information and Installation Instructions. Gray Paint Coating Information...
Save by Purchasing a Quantity of 24 Boxes (600 Pieces)! Simpson Strong Tie HUS210 2 x 10 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-5/8" (Wide) x 9" (Height) x 3" (Seat Depth) Fastener Options: (30) 16d Nails or...
The Daniar model AH-15-GL pneumatic Glazing Tool is designed for installing urethane glazing. It can be used with specialty tips for a wide range of specific applications. This tool is very adaptable. There are 4 plastic tips available with different hardness that can be shaped to your specific requirements. Performance: The Danair Auto-Hammer® has no trigger. Hammering action begins with a light pressure on the working surface and stops when lifted away. The Auto-Hammer® will deliver...
Save by Purchasing a Quantity of 8 Boxes (128 Pieces)! The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard G90 Zinc...
Save by Purchasing a Quantity of 12 Boxes (72 Pieces)! Simpson Strong-Tie CB66 column bases are used to provide a connection of a 6 x 6 (5-1/2" x 5-1/2") post to concrete. The CB66 base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Galvanized Steel Base Material: 7 Ga Galvanized (5-1/2" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB66 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...
Save by Purchasing a Quantity of 9 Boxes (450 Pieces)! Simpson Strong Tie HU28 2 x 8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 5-1/4" (Height) x 2-1/4" (Seat Depth) Fasteners: (6) .162 x 3-1/2" (16d) Nails (Header) (4) .148 x 1-1/2"...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.06/11.88 installs 2" or 2-1/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.06/14 is used to install 2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x...
Save by Purchasing a Pallet of 48 Boxes! The Simpson Strong-Tie LTP4 Lateral Tie Plate transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent wood splitting for single and double top plate applications. May be installed over plywood sheathing. Material: 20 Gauge Finish: Standard G90 Length: 4-1/4" Width: 3" Fasteners: (12) 8d x 1-1/2" (12) SD #9 x 1-1/2" LTP4 Information and Installation Instructions Standard G90 Zinc Galvanized Coating...