Login/Register
Shopping Cart
OR
The Senco PS20XP Heavy Duty P-Series Construction Stapler is constructed of durable, high strength components developed for extreme performance and longevity. The drive track design and quick clear latch improves the overall holding power of the fasteners, increasing drive performance, and virtually eliminating fastener jams and misfires. This construction stapler is suited for wire lathing, sheathing, and foam insulation board applications, driving 16-gauge 1” crown P-series staples up to 2”...
This Danair AH-15M Auto Hammer comes with a Medium Hard Black Tip installed in the tool. The Danair AH -15 Pneumatic Automatic Hammers® offer the Manufacturing, Fabricating and Assembly Industry a replacement to cumbersome hammers and mallets. The hammer mechanism starts with light pressure and stops immediately when the auto hammer is lifted from the surface. All Danair AH-15 Auto Hammer® have interchangeable hammer tips to handle soft woods and plastics to hard metals like steels....
Save by Purchasing a Quantity of 36 Boxes (3600 Pieces)! Simpson Strong-Tie LU26 2 x 6 Joist Hangers are an economical and time saving solution to securely installing 2 x 6 joists to a wood ledger or beam. You can install LU26 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 1-1/2" (Seat Depth) Fastener Options: (6) .162 x 3-1/2" 16d...
If you cut 4x material, there is nothing like cutting it in one pass with the SKIL SPT 70 WM-01 10-1/4" Worm Drive Sawsquatch Beam Saw. No matter what the material, this worm drive Skilsaw is built to be relentless with its 15 Amp dual field motor designed specifically for saws. It keeps the motor cooler, providing increased power and durability for the life of the saw. You can increase your productivity on the jobsite by making one clean cut the first time, every time. Includes: (1)...
The CLC Work Gear #21448 4-Piece Leather Pro Framer's Tool Bag Set features top grain leather with a double-tongue roller buckle belt, easy-carry pouches, and 17 pockets and sleeves for your favorite nails and tools. 5 main reversed nail and tool pockets. 12 smaller pockets, sleeves, and holders fit pliers, nail sets, pencils, knife, etc. Patented easy-carry handle design provides simple adjustments, easy carrying and storage of combo without spilling contents. Leather combination square and...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS1.81/14 is used to install 1-3/4" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12)...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS1.81/11.88 sets a new standard for engineered wood top flange hangers. The ITS1.81/11.88 installs 1-3/4" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1...
The CLC 51452 4 Piece Pro-Framers Top-Of-The-Line Combo Tool Bag Set is one of their best quality, 4-piece, pro framer's combo tool belt set. Manufactured with double-layered ballistic fabric with premium grade leather trim to meet the demands of the professional carpenter. Also includes a 5" padded, double-tongue roller buckle belt, easy-carry pouches, and 27 pockets and sleeves to keep your favorite nails and tools within easy reach. 8 main nail and tool pockets. 17 Smaller pockets fit...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH46-8/3 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 3x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 2-7/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-8/3 Information and Installation Instructions. Gray Paint Coating Information...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! Simpson Strong-Tie HDU4-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (10) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90...
Save by Purchasing a Quantity of 36 Boxes (3600 Pieces)! Simpson Strong Tie LUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26 hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16"...
This Danair AH-15H Auto Hammer comes with a Hard Yellow Tip installed in the tool. The Danair AH -15 Pneumatic Automatic Hammers® offer the Manufacturing, Fabricating and Assembly Industry a replacement to cumbersome hammers and mallets. The hammer mechanism starts with light pressure and stops immediately when the auto hammer is lifted from the surface. All Danair AH-15 Auto Hammer® have interchangeable hammer tips to handle soft woods and plastics to hard metals like steels....