Login/Register
Shopping Cart
OR
Filter
Sort By
The S/HD10S Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HD10S is...
The S/HD10S Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HD10S is designed to provide loads for high-load shearwalls, braced-wall panels and lateral applications. The holdown features a unique seat that greatly minimizes deflection under load. The S/HD10S has been designed to utilize fewer fasteners and reduce installation time. Can be installed directly on the base...
The Simpson Strong-Tie SSTB20HDG Hot Dipped Galvanized (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB...
The Simpson Strong-Tie SSTB20HDG Hot Dipped Galvanized (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 21-5/8" Minimum Embedment: 16-5/8" Finish: Hot...
Simpson Strong-Tie CB48 column bases are used to provide a connection of a 4 x 8 (3-1/2" x 7-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7...
Simpson Strong-Tie CB48 column bases are used to provide a connection of a 4 x 8 (3-1/2" x 7-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 7-1/2") Fasteners: (2) 5/8" Machine Bolts CB48 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...
Save by Purchasing a Quantity of 10 Boxes (60 Pieces)! The Simpson CBSQ66-SDS2 (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to...
Save by Purchasing a Quantity of 10 Boxes (60 Pieces)! The Simpson CBSQ66-SDS2 (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 6 x 6 Nominal (5-1/2" x 5-1/2") Base: 12 Ga. (5-1/2" x 5-1/2") Strap: 10 Ga. x 3" Wide x...
Simpson Strong-Tie EPB66 allows you to install an elevated 6 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 6 x 6 post to stay above most standing water thus delaying...
Simpson Strong-Tie EPB66 allows you to install an elevated 6 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 6 x 6 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 8" Length Base Size:...
The Simpson Strong-Tie HD19 Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown can obtain a wide...
The Simpson Strong-Tie HD19 Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown can obtain a wide variety of allowable tension loads depending on the thickness of the posts and the anchor bolt used. The HD19 must be connected to a minimum of 5-1/2" of material. Base Material: 3/8" Steel Body Material: 3 Gauge Steel Finish: Simpson Gray Paint Stud Bolts: (5) 1" Anchor Bolt Diameter: 1-1/8" or...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! Simpson Strong-Tie HDU5-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! Simpson Strong-Tie HDU5-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90...
Save by Purchasing a Pallet of 44 Boxes! Simpson Strong-Tie MASAPZ ZMaz®anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAPZ...
Save by Purchasing a Pallet of 44 Boxes! Simpson Strong-Tie MASAPZ ZMaz®anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAPZ is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAPZ version is used for installation on panelized forms. This anchor featured ZMax® coating when additional corrosion resistance is needed. Attaches easily to the concrete...
The Simpson Strong-Tie PAB5-12-HDG 5/8" x 12" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems...
The Simpson Strong-Tie PAB5-12-HDG 5/8" x 12" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department...
Save by Purchasing a Quantity of 15 Boxes (150 Pieces)! The Simpson PB66 Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to...
Save by Purchasing a Quantity of 15 Boxes (150 Pieces)! The Simpson PB66 Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts PB66 information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...
The S/HD10B Simpson Strong-Tie bolt-on holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HD10B...
The S/HD10B Simpson Strong-Tie bolt-on holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HD10B is designed to provide loads for high-load shearwalls, braced-wall panels and lateral applications. The holdown features a unique seat that greatly minimizes deflection under load. Designed for installation with bolts into the studs or column. Can be installed directly on the base track or raised...
The Simpson Strong-Tie SSTB20L (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to...
The Simpson Strong-Tie SSTB20L (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 24-5/8" Minimum Embedment: 16-5/8" Finish: None Rolled threads for higher...
The Simpson CBSQ66-SDS2HDG Hot Dipped Galvanized (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1"...
The Simpson CBSQ66-SDS2HDG Hot Dipped Galvanized (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanized for additional corrosion resistance. Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 6 x 6 Nominal (5-1/2" x 5-1/2") Base: 12 Ga. (5-1/2" x 5-1/2")...
Simpson Strong-Tie EPB66HDG allows you to install an elevated 6 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 6 x 6 post to stay above most standing water thus...
Simpson Strong-Tie EPB66HDG allows you to install an elevated 6 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 6 x 6 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Hot Dip Galvanizing provides corrosion resistance for additional...
Simpson Strong-Tie HDU5-SDS2.5HDG Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson...
Simpson Strong-Tie HDU5-SDS2.5HDG Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Hot Dipped Galvanized holdowns should be used when the application in either exterior or in...
The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the...
The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard G90 Zinc Width: 2-1/2" Length: 12-3/8" Anchor Bolt: 5/8" Fastener...