Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Drive® SDS25312 1/4" x 3-1/2" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25312 screw...
The Simpson Strong-Drive® SDS25312 1/4" x 3-1/2" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25312 screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 3-1/2" Thread Length: 2-1/4" Serrated Shank Diameter: 1/4" Point Type: Type 17 Point Drive...
The Simpson Strong-Tie THD37300CS6SS 3/8" x 3" TITEN HD Type 316 Stainless Countersunk Screw Anchor with countersunk head is part of a family of products that sets the standard for high-performance...
The Simpson Strong-Tie THD37300CS6SS 3/8" x 3" TITEN HD Type 316 Stainless Countersunk Screw Anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount...
The THD37500H 3/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...
The THD37500H 3/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...
The Simpson Strong-Tie THD37600H6SS Type 316 Stainless Steel 3/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THD37600H6SS Type 316 Stainless Steel 3/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson Strong-Tie TNT18234H Titen Turbo™ 3/16" x 2-3/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...
The Simpson Strong-Tie TNT18234H Titen Turbo™ 3/16" x 2-3/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...
The Intercorp Strong-Point 2-1/2" x #8 Yellow Zinc Coarse Phillips Bugle Drywall Screws are a specialized type of fastener designed for attaching drywall (also known as gypsum board or sheetrock) to...
The Intercorp Strong-Point 2-1/2" x #8 Yellow Zinc Coarse Phillips Bugle Drywall Screws are a specialized type of fastener designed for attaching drywall (also known as gypsum board or sheetrock) to wood or steel framing during both residential and commercial construction. Drywall fasteners can also used for other applications, such as attaching drywall to furring strips and installing drywall to existing walls and ceilings during renovations. These drywall fasteners offer several design...
BP34-3 Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates have no corrosion resistance and...
BP34-3 Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates have no corrosion resistance and should not be used with ACQ lumber. Hole Size: 13/16" Dimension: 2-3/4" x 2-3/4" Thickness: 5/16" Coating: None Mild Steel Imported Picture may not match product exactly Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from...
These 5/8" x 3" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary...
These 5/8" x 3" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...
These 5/8" x 6-1/2" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 15/16" Socket Imported Thread...
These 5/8" x 6-1/2" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 15/16" Socket Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of...
The Senco A101259 1-1/4" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There...
The Senco A101259 1-1/4" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There are 2,600 nails in the package. Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or our vendor's warehouse. If we or our vendor are out of stock or do not have enough inventory to complete your order we will...
Head is Painted Tan! The Simpson S10A325KJT 3-1/4" X .131" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head is painted tan to match siding or decking when...
Head is Painted Tan! The Simpson S10A325KJT 3-1/4" X .131" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head is painted tan to match siding or decking when applicable. The countersunk casing head with a checker pattern on the head helps the nail blend with the wood grain. The annular ring shank increases pull-out resistance thus decreasing chances of the nails backing out over time. Type 304 stainless steel Countersunk casing head Ring Shank shank 21º...
The Simpson S15N200SFN 2" x 15ga. Angled Type 304 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style...
The Simpson S15N200SFN 2" x 15ga. Angled Type 304 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style head has greater bearing area to draw trim to the substrate. DA Style Finish Nails Fit the Following Tools: (Please check your owners manual regarding the proper lengths that your tool can use) Senco: FinishPro42XP, FinishPro41XP, FinishPro35, SFN40, SFN30, SFN1, SFN2B, SN1 Hitachi: NT64MA4...
Simpson Strong Drive® SSNA10D 1-1/2" x .148" Type 316 SSNA10D Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required as...
Simpson Strong Drive® SSNA10D 1-1/2" x .148" Type 316 SSNA10D Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required as well as protection from corrosive conditions. There are approximately 120 nails in the 1 lb. pack. The nails are type 316 stainless steel providing high/severe corrosion protection. SSNA10D Information and Data Type 316 Fastener Stainless Steel Information Type 316 stainless steel is a nickel...
The Simpson Strong-Tie Deck Drive™ DSVR212S #10 x 2-1/2" Red Collated Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and...
The Simpson Strong-Tie Deck Drive™ DSVR212S #10 x 2-1/2" Red Collated Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSVR212S is ideally suited to be driven using a PRO300S Quik Drive® Auto Feed Screw Gun. This screw is easily countersunk into today’s wood deck boards giving it a nice finished look. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth...
Simpson Strong-Tie PDPAWL-287MG Mechanical Galvanized Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel...
Simpson Strong-Tie PDPAWL-287MG Mechanical Galvanized Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. Length: 2-7/8" Head Diameter: .300" Shank Diameter: .157" Coating: Mechanical Galvanized PDPAWL Series Fasteners Tension and Shear Loads in Normal Weight Concrete PAT Fastener MSDS...
The Simpson Strong-Drive® SDS25312SS-R25 1/4" x 3-1/2" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood...
The Simpson Strong-Drive® SDS25312SS-R25 1/4" x 3-1/2" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25312SS-R25 stainless steel screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 3-1/2" Thread Length: 2-1/4" Serrated Shank...