Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie WT-8 Wedge Form Ties are designed for low foundation wall applications with a 8" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and...
The Simpson Strong-Tie WT-8 Wedge Form Ties are designed for low foundation wall applications with a 8" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 8". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Explanation of "Stock" Availability Term Stock...
Simpson Strong Tie AnchorMate® 7/8" Anchor Bolt Holders are designed to hold 7/8" anchor bolts including SSTB Bolts in place before the concrete pour. With a unique grip placed properly there is...
Simpson Strong Tie AnchorMate® 7/8" Anchor Bolt Holders are designed to hold 7/8" anchor bolts including SSTB Bolts in place before the concrete pour. With a unique grip placed properly there is no need for a hex nut during the pour. Additionally and Anchormate® protects the threads from splashed concrete. Built-in 2x4 and 2x6 stops eliminate measuring. Elevated bolt grippers allow easy trowel finishing. Color-coded for easy size identification. Lightweight, durable and easy to use....
OCM, Inc #STSEC-8HH 8" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining...
OCM, Inc #STSEC-8HH 8" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The...
The OCM, Inc Walerless Plywood Spreader Cleat Form System is used when forming a 8" wide wall using 1-1/8" plywood. The OCM, Inc Spreader Cleats are designed for the contractor who is engaged in a...
The OCM, Inc Walerless Plywood Spreader Cleat Form System is used when forming a 8" wide wall using 1-1/8" plywood. The OCM, Inc Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The OCM, Inc Spreader Cleat System is excellent for low wall...
OCM, Inc #STLEC-8HH 8" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard...
OCM, Inc #STLEC-8HH 8" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties use...
Dayton Superior 15423 A3 8" Wall x 1-3/16" Round End Plastic Cone Snap Ties can be used with either the #5 forming system with 3/4" plywood. This snap tie forming method is used for retaining and...
Dayton Superior 15423 A3 8" Wall x 1-3/16" Round End Plastic Cone Snap Ties can be used with either the #5 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snap Tie Wedge. Dayton Superior Snap Ties standard snap tie uses 1" x 1" A-2 Plastic Cones to provide a nominal 1" break-back. Dayton Superior A4H Hex Head Snap Ties are manufactured with hot-forged...
The Simpson Strong-Tie WT-10 Wedge Form Ties are designed for low foundation wall applications with a 10" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and...
The Simpson Strong-Tie WT-10 Wedge Form Ties are designed for low foundation wall applications with a 10" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 10". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Explanation of "Stock" Availability Term Stock...
Dayton Superior A3 15407 8" Wall x 1-5/8" Round End Plastic Cone Snap Ties can be used with either the #5 forming system with 1-1/8" plywood. This snap tie forming method is used for retaining and...
Dayton Superior A3 15407 8" Wall x 1-5/8" Round End Plastic Cone Snap Ties can be used with either the #5 forming system with 1-1/8" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snap Tie Wedge. Dayton Superior Snap Ties standard snap tie uses 1" x 1" A-2 Plastic Cones to provide a nominal 1" break-back. Dayton Superior A4H Hex Head Snap Ties are manufactured with hot-forged...
The OCM, Inc SC10-118 Walerless Plywood Spreader Cleat Form System is used when forming a 10" wide wall using 1-1/8" plywood. The OCM, Inc Spreader Cleats are designed for the contractor who is...
The OCM, Inc SC10-118 Walerless Plywood Spreader Cleat Form System is used when forming a 10" wide wall using 1-1/8" plywood. The OCM, Inc Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The OCM, Inc SC10-118 Spreader Cleat System is...
CWC 135-141 #18 x 1,100' Yellow Twisted Seine Twine (also referred to as chalk or mason line) has excellent resistance to rot, abrasion, water, oil, grease and most chemicals. Less bend, lower...
CWC 135-141 #18 x 1,100' Yellow Twisted Seine Twine (also referred to as chalk or mason line) has excellent resistance to rot, abrasion, water, oil, grease and most chemicals. Less bend, lower stress point than braided seine twine. Ties easily and knots securely. Common to the marine, electrical and construction industries, this twine is also useful in home and garden applications. Resists abrasion, mildew and most chemicals Used for chalk line, fishing line and net repair #18 Size Explanation...
The Simpson Strong-Tie WT-12 Wedge Form Ties are designed for low foundation wall applications with a 12" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and...
The Simpson Strong-Tie WT-12 Wedge Form Ties are designed for low foundation wall applications with a 12" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 12". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Explanation of "Stock" Availability Term Stock...
The OCM, Inc SC12-75 Walerless Plywood Spreader Cleat Form System is used when forming a 12" wide wall using 3/4" plywood. The OCM, Inc Spreader Cleats are designed for the contractor who is engaged...
The OCM, Inc SC12-75 Walerless Plywood Spreader Cleat Form System is used when forming a 12" wide wall using 3/4" plywood. The OCM, Inc Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The OCM, Inc SC12-75 Spreader Cleat System is excellent...
OCM, Inc #STSEC-10HH 10" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining...
OCM, Inc #STSEC-10HH 10" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The...
The OCM, Inc SC12-118 Walerless Plywood Spreader Cleat Form System is used when forming a 12" wide wall using 1-1/8" plywood. The OCM, Inc Spreader Cleats are designed for the contractor who is...
The OCM, Inc SC12-118 Walerless Plywood Spreader Cleat Form System is used when forming a 12" wide wall using 1-1/8" plywood. The OCM, Inc Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The OCM, Inc SC12-118 Spreader Cleat System is...
OCM, Inc #STLEC-10HH 10" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard...
OCM, Inc #STLEC-10HH 10" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties...
Simpson Strong Tie W1 Wedges are designed to be used with the Simpson Wedge Form Ties when forming low foundation walls. Two (2) W1 wedges are required for each wedge form tie used. Refer to...
Simpson Strong Tie W1 Wedges are designed to be used with the Simpson Wedge Form Ties when forming low foundation walls. Two (2) W1 wedges are required for each wedge form tie used. Refer to technical bulletin T-WT for recommended spacing. Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or our vendor's warehouse. If we or our vendor are out of stock or do not have enough inventory to complete your...