Login/Register
Shopping Cart
OR
Simpson Strong-Tie ST9 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications....
Simpson Strong-Tie ST9 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 9" (Length) Fastener Options: (8) 16d Nails (8) SD10 x 1-1/2" Screws ST9 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz....
Simpson Strong-Tie LU24 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 joists to a wood ledger or beam. You can install LU24 hangers with 10d ,16d nails...
Simpson Strong-Tie LU24 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 joists to a wood ledger or beam. You can install LU24 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) .162 x 3-1/2" 16d Nails (Header) (2) .148 x 1-1/2" 10d Nails (Joist)...
Simpson Strong Tie LUS24 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...
Simpson Strong Tie LUS24 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24 hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-3/4" (Seat Depth) Fastener...
Simpson Strong Tie U24 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16...
Simpson Strong Tie U24 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) .162" x 3-1/2" 16d Nails (Header) (2) .148" x 1-1/2" 10d Nails (Joist) U24 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
Simpson Strong Tie U24R Rough 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U24R Rough 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 3-5/8" (Height) x 2" (Seat Depth) Fastener Options: (4) .162" x 3-1/2" 16d Nails (Header) (2) .148" x 1-1/2" 10d Nails (Joist) U24R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
Save by Purchasing a Quantity of 48 Boxes (4800 Pieces)! Simpson Strong Tie LUS24 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points...
Save by Purchasing a Quantity of 48 Boxes (4800 Pieces)! Simpson Strong Tie LUS24 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24 hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16"...
Simpson Strong-Tie LU24R-18 Rough 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 rough sawn joists to a wood ledger or beam. You can install LU24R-18...
Simpson Strong-Tie LU24R-18 Rough 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 rough sawn joists to a wood ledger or beam. You can install LU24R-18 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2" (Wide) x 3-11/16" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) .162 x 3-1/2" 16d Nails (Header) (2) .148 x 1-1/2"...
Simpson Strong-Tie ST12 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications....
Simpson Strong-Tie ST12 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 11-5/8" (Length) Fastener Options: (10) 16d Nails (10) SD10 x 1-1/2" Screws ST12 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains...
Simpson Strong-Tie MSTA12 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x...
Simpson Strong-Tie MSTA12 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: (10) 10d Nails (10) SD9 x 1-1/2" Screws...
Simpson Strong-Tie LSTA12 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x...
Simpson Strong-Tie LSTA12 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a LSTA strap that requires bending the strap can only be bent one time. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: (10) 10d Nails (10) SD9 x 1-1/2" Screws...
Simpson Strong-Tie ECCLL444HDG Hot Dipped Galvanized End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Material: 7 gauge...
Simpson Strong-Tie ECCLL444HDG Hot Dipped Galvanized End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-1/2" (Beams) x 3-1/2" (Posts) Fasteners: (4) 5/8" x 4-1/2" Machine Bolts (Beam & Post) ECCLL444 Information and Installation Instructions. Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The...
Simpson Strong-Tie CCO3 1/4 Column Caps with no post straps provides a high capacity connection between a 3-1/8" wide beam and a steel post. The CCO3 1/4 Column Caps comes with no coating to allow...
Simpson Strong-Tie CCO3 1/4 Column Caps with no post straps provides a high capacity connection between a 3-1/8" wide beam and a steel post. The CCO3 1/4 Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: No Coating Dimensions: 3-1/8" (Beam) x...
Simpson Strong-Tie CCQ3-4SDS2.5 Column Caps provide a high capacity connection between a 3-1/8" beam and a 4x post. CCQ3-4SDS2.5 Column Caps should be used when the beam extends through the post....
Simpson Strong-Tie CCQ3-4SDS2.5 Column Caps provide a high capacity connection between a 3-1/8" beam and a 4x post. CCQ3-4SDS2.5 Column Caps should be used when the beam extends through the post. Each CCQ3-4SDS2.5 Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call our sales...
Simpson Strong-Tie ECC44HDG Hot Dipped Galvanized End Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. ECC44HDG End Column Caps should be used when the 4x beam...
Simpson Strong-Tie ECC44HDG Hot Dipped Galvanized End Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. ECC44HDG End Column Caps should be used when the 4x beam ends at the 4x post. Please Note: This column cap is also available in powder coat and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-5/8" (Beam) x 3-5/8" (Post) x 5-1/2"...
The Simpson AC4Z ZMax® Split Post Caps allow you to install the cap after the 4 x 4 post and 4x beam are set. ZMax® protection provides additional corrosion resistance when applicable....
The Simpson AC4Z ZMax® Split Post Caps allow you to install the cap after the 4 x 4 post and 4x beam are set. ZMax® protection provides additional corrosion resistance when applicable. Material: 18 Gauge Finish: ZMax® G-185 Galvanized Dimensions 3-9/16" (W) x 6-1/2" (L) Fastener Options: Beam...(8) .162 x 3-1/2" Nails (Min) Beam...(14) .162 x 3-1/2" Nails (Max) Post...(8) .162 x 3-1/2" Nails (Min) Post...(14) .162 x 3-1/2" Nails (Max) Post and Beam...(28) SD10 x 1-1/2" (Max) AC4Z...
The Simpson Strong-Tie CJT3ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a...
The Simpson Strong-Tie CJT3ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT3ZL long (4-3/4") pins can be used with 5-1/8" Glulam Beams or 6x sawn lumber. Minimum Joist Size: Douglas Fir - 6 x 8 Glulam Beam - 5-1/8" x 7-1/2" Material: 12 Gauge Finish:...
The Simpson Strong-Tie BC40R Half Base is an economical way to attach a rough 4 x 4 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 4" x (L) 4" x (H) 3" Finish:...
The Simpson Strong-Tie BC40R Half Base is an economical way to attach a rough 4 x 4 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 4" x (L) 4" x (H) 3" Finish: Standard G90 Zinc Fastener Options: (10) 16d Nails (10) SD10 x 1-1/2" BC40R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides...
The Simpson Strong-Tie HGA10HDG Hot Dipped Galvanized Gusset Angle w/SDS Screws attaches to the top plate and gable trusses or rim joist to provides good lateral (cross) wind resistance. Use Hot...
The Simpson Strong-Tie HGA10HDG Hot Dipped Galvanized Gusset Angle w/SDS Screws attaches to the top plate and gable trusses or rim joist to provides good lateral (cross) wind resistance. Use Hot Dipped Galvanized HGA10 angles when you need additional corrosion protection. Includes: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws. Material: 14 Gauge Finish: Hot Dipped Galvanized/li> Fasteners included: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws HGA10HDG Information and...
The Simpson Strong-Tie ABW44RZ for rough 4x4 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above...
The Simpson Strong-Tie ABW44RZ for rough 4x4 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Additionally the ZMax® coating provides additional protection from exposure to the elements. The ABW44RZ...
The Simpson Strong-Tie ABU44RZ with ZMax® Corrosion Resistance is an adjustable post base for rough size 4 x 4 post offers moisture protection and a finished hardware appearance. The ABU44RZ...
The Simpson Strong-Tie ABU44RZ with ZMax® Corrosion Resistance is an adjustable post base for rough size 4 x 4 post offers moisture protection and a finished hardware appearance. The ABU44RZ features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 16 Gauge Strap Material: 12 Gauge Dimensions: (W)...
Save by Purchasing 48 Box Special! The Simpson Strong-Tie STC Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The STC has a single 1-1/2" slot that will...
Save by Purchasing 48 Box Special! The Simpson Strong-Tie STC Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The STC has a single 1-1/2" slot that will permit the truss chord to move vertically when loads are applied to the roof. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (3) 8d Nails STC Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of...
The Simpson Strong-Tie LS30Z Skewable Reinforcing Angles with ZMax® Protective Coating is field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS30Z...
The Simpson Strong-Tie LS30Z Skewable Reinforcing Angles with ZMax® Protective Coating is field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS30Z Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS30Z Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Zmax® Coating Length: 3-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (6) 10d x 1-1/2" Nails LS30Z Information and...
Simpson Strong-Tie HD3BHDG Hot Dipped Galvanized Holdowns are a light duty bracket that is designed for a variety of uses including but not limited to shearwalls, braced-wall panels and other...
Simpson Strong-Tie HD3BHDG Hot Dipped Galvanized Holdowns are a light duty bracket that is designed for a variety of uses including but not limited to shearwalls, braced-wall panels and other lateral applications. The holdown must be attached to the receiving member with 5/8" machine bolts. A minimum wood member thickness of 1-1/2" is required to reach the least allowable tension load. The bottom stud hole is 4-3/4" above the plate line so you can install the holdown flush with the plate...
Save by Purchasing a Quantity of 10 Boxes (60 Pieces)! The Simpson Strong-Tie HDQ8-SDS3 holdown combines low deflection and high loads with ease of installation. The unique seat design of the HDQ8...
Save by Purchasing a Quantity of 10 Boxes (60 Pieces)! The Simpson Strong-Tie HDQ8-SDS3 holdown combines low deflection and high loads with ease of installation. The unique seat design of the HDQ8 greatly minimizes deflection under load. (20) 3" SDS Simpson Strong-Tie® Strong-Drive® screws are included which install easily, reduces fastener slip and provide a greater net section area of the post when compared to bolts. They may be installed either flush or raised off the mudsill...