Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong-Tie CB46HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB46HDG base is installed during the pouring of the...
Simpson Strong-Tie CB46HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB46HDG base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Hot Dipped Galvanized Steel Base Material: 7 Ga Hot Dipped Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46HDG Information and Installation Instructions Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the...
Simpson Strong-Tie EPB46HDG allows you to install an elevated 4 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 4 x 6 post to stay above most standing water thus...
Simpson Strong-Tie EPB46HDG allows you to install an elevated 4 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 4 x 6 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Hot Dip Galvanizing provides corrosion resistance for additional...
The Simpson Strong-Tie HD9BHDG Hot Dipped Galvanized Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This...
The Simpson Strong-Tie HD9BHDG Hot Dipped Galvanized Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown uses the same design as the HDQ8-SDS2.5 holdown that is proven to greatly reduce deflection while under load. All the HDB style holdown anchors are designed to provide loads for intermediate-load-range shearwalls, braced wall panels and lateral applications. The HD9B must be connected to a...
The Simpson Strong-Tie LTTP2 Light Tension Tie is designed for wood joist attachments to concrete or masonry. The LTTP2 features an extruded anchor bolt hole to accommodate 1/2", 5/8" and 3/4" bolt...
The Simpson Strong-Tie LTTP2 Light Tension Tie is designed for wood joist attachments to concrete or masonry. The LTTP2 features an extruded anchor bolt hole to accommodate 1/2", 5/8" and 3/4" bolt diameters. It also features two separate nailing patterns: obround holes spaced 3" apart for I-joist purlins and square holes spaced to accommodate the narrow face of 2x solid-sawn purlins. The LTTP2 may be installed vertically on the wide face of a minimum 2x4 stud for holdown applications and can...
Simpson Strong-Tie MASAP anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAP is not only quick to install they also eliminate the...
Simpson Strong-Tie MASAP anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAP is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAP version is used for installation on panelized forms. Attaches easily to the concrete form for quick installation Lays flat on the panelized form so there is no anchor bolt to finish around No labor costs involved in drilling...
The Simpson Strong-Tie PAB5-12 5/8" x 12" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...
The Simpson Strong-Tie PAB5-12 5/8" x 12" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...
Simpson Strong-Tie PBS66HDG Hot Dipped Galvanized Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab or pier. The 1" standoff keeps the post off the concrete which...
Simpson Strong-Tie PBS66HDG Hot Dipped Galvanized Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab or pier. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Hot dipped galvanizing provides and additional layer of protection from deterioration due to weather. Finish: Hot Dipped Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS66HDG...
The S/HDU9 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU9 holdown...
The S/HDU9 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU9 holdown combines performance with ease of installation using #14 screws self-drilling tapping screws thus saving time and labor.. The pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load. Foundation Anchor Diameter: 7/8" Fasteners (Not Included): (18) #14 Screws...
Save by Purchasing a Quantity of 500 SSTB20 Bolts! The Simpson Strong-Tie SSTB20 (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall...
Save by Purchasing a Quantity of 500 SSTB20 Bolts! The Simpson Strong-Tie SSTB20 (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 21-5/8" Minimum...
The Simpson CBSQ66-SDS2 (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post...
The Simpson CBSQ66-SDS2 (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 6 x 6 Nominal (5-1/2" x 5-1/2") Base: 12 Ga. (5-1/2" x 5-1/2") Strap: 10 Ga. x 3" Wide x 8-3/4" High CBSQ66 Information and Installation...
The Simpson Strong-Tie HD12 Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown can obtain a wide...
The Simpson Strong-Tie HD12 Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown can obtain a wide variety of allowable tension loads depending on the thickness of the posts and the anchor bolt used. The HD12 must be connected to a minimum of 3-1/2" of material. Base Material: 3/8" Steel Body Material: 3 Gauge Steel Finish: Simpson Gray Paint Stud Bolts: (4) 1" Anchor Bolt Diameter: 1" or 1-1/8"...
Simpson Strong-Tie HDU5-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson...
Simpson Strong-Tie HDU5-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 5/8" Pre-deflected...
The Simpson Strong-Tie LTTI31 Light Tension Tie is designed to attach wood chord open wen trusses to concrete or masonry walls. The may also be installed vertically as long as they are attached to a...
The Simpson Strong-Tie LTTI31 Light Tension Tie is designed to attach wood chord open wen trusses to concrete or masonry walls. The may also be installed vertically as long as they are attached to a minimum 2 x 6 stud. If the base of the LTTI31 tie is flush with the concrete or masonry wall the allowable tension load increases (use link below for more information). Strap Material: 18 Gauge Plate Material: 3 Gauge Finish: Standard G90 Zinc Width: 3-3/4" Length: 31" Anchor Bolt: 5/8" Fastener...
Simpson Strong-Tie MASAPZ ZMaz®anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAPZ is not only quick to install they also...
Simpson Strong-Tie MASAPZ ZMaz®anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAPZ is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAPZ version is used for installation on panelized forms. This anchor featured ZMax® coating when additional corrosion resistance is needed. Attaches easily to the concrete form for quick installation Lays flat on the...
The Simpson Strong-Tie PAB5-12 5/8" x 12" High Strength Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and...
The Simpson Strong-Tie PAB5-12 5/8" x 12" High Strength Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from high strength steel for higher load values. Please call our sales department direct at 800-323-2999 for pricing and...
The Simpson PB66 Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed...
The Simpson PB66 Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts PB66 information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of...