Login/Register
Shopping Cart
OR
Filter
Sort By
With the Simpson Strong-Tie SDWC15450-KT 4-1/2" Structural Screws you will now have the flexibility to provide an approved connection even after the exterior shear wall has been installed. The labor...
With the Simpson Strong-Tie SDWC15450-KT 4-1/2" Structural Screws you will now have the flexibility to provide an approved connection even after the exterior shear wall has been installed. The labor savings installing the SDWC15450-KT 4-1/2" Structural Screws as opposed to installing traditional ties and straps will more than offset the costs of the fasteners. The 6-lobe drive using a T-30 bit reduces your chance of stripping out the screw, enabling a quick and secure installation. Fully...
The Simpson Strong-Tie THDB25178CS 1/4" x 1-7/8" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease...
The Simpson Strong-Tie THDB25178CS 1/4" x 1-7/8" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount profile. Countersinking...
The THDB25178H 1/4" x 1-7/8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal...
The THDB25178H 1/4" x 1-7/8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The...
The Simpson Strong-Tie THDC25200H6SS Type 316 Stainless Steel 1/4" x 2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THDC25200H6SS Type 316 Stainless Steel 1/4" x 2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson Strong-Tie TNT18114H Titen Turbo™ 3/16" x 1-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...
The Simpson Strong-Tie TNT18114H Titen Turbo™ 3/16" x 1-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...
The Intercorp Strong-Point Strong-Point 89MZ #8 x 1-1/4" Phillips Modified Truss (R/W) Head, K-Lath Screw is a zinc coated multipurpose sheet metal screw for light to medium gauge applications. A...
The Intercorp Strong-Point Strong-Point 89MZ #8 x 1-1/4" Phillips Modified Truss (R/W) Head, K-Lath Screw is a zinc coated multipurpose sheet metal screw for light to medium gauge applications. A common use is to attache wire lath to wood or light gauge metal. Meets ASTM1 A 510 for carbon steel manufacturing Meets ASTM B 633 for electrodeposited zinc coatings Meets ASTM F1941 for corrosion resistance Installation: A standard screw gun with torque limiting nose piece set at a maximum of 3000...
1/2" Hot Dipped Galvanized Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads...
1/2" Hot Dipped Galvanized Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads and nuts from pulling into the wood. These washers are hot dipped galvanized providing corrosion protection when required. Bolt Hole Size: 9/16" Approximate Outside Diameter: 2-1/2" Approximate Washer Thickness: 1/4" Coating: Hot Dipped Galvanized Hot Dipped Galvanized Coating Information Hot-Dip...
1/2" USS Hot Dipped Galvanized Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Hot Dipped Galvanizing provides corrosion...
1/2" USS Hot Dipped Galvanized Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Hot Dipped Galvanizing provides corrosion resistance to allow you to these washers with ACQ lumber. Bolt Size: 1/2" Inside Diameter: 9/16" Outside Diameter: 1-3/8" Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The coating weight increases with material thickness. The minimum average...
BP12-3 Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates have no corrosion resistance and...
BP12-3 Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates have no corrosion resistance and should not be used with ACQ lumber. Hole Size: 9/16" Dimension: 3" x 3" Thickness: 1/4" Coating: None Mild Steel Imported Picture may not match product exactly Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our...
These 1/2" x 24" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated...
These 1/2" x 24" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated Special lengths available upon request Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments....
These 1/2" x 3" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary...
These 1/2" x 3" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...
These 1/2" x 5" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported Thread Length May...
These 1/2" x 5" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of Corrosion...
Fastap Exterior Screws...The Best Coated Exterior Screw You Can Buy! Period! Fastap Plus™ DAC300W 500-Pack 3" x #9 Phillips Drive exterior grade carpentry screws with DuracoatXT™ and...
Fastap Exterior Screws...The Best Coated Exterior Screw You Can Buy! Period! Fastap Plus™ DAC300W 500-Pack 3" x #9 Phillips Drive exterior grade carpentry screws with DuracoatXT™ and Power Point v3™ give you building and remodeling capabilities that nails and conventional screws can't offer. Fastap Screws were developed specifically for any outdoor project where rust and corrosion needs to be prevented. More cost effective than stainless steel (and with greater shear load...
The Grip Rite LP3STBBK Brown 3" x #9 PrimeGuard Plus Deck Screws are the ideal screw for many decking projects. The 6-point (T25) Star Drive provides additional torque during installation as well as...
The Grip Rite LP3STBBK Brown 3" x #9 PrimeGuard Plus Deck Screws are the ideal screw for many decking projects. The 6-point (T25) Star Drive provides additional torque during installation as well as less chance of stripping. Exterior grade proprietary PrimeGuard PlusĀ® coating with a lifetime guarantee against rust and corrosion when used with treated lumber Type 17 point reduces need to pre-drill and prevents wood-splitting Ideal for all exterior material applications Tapered, countersinking...
These 3/8" (9mm) long Grip Rite GRA1138 A11 staples fit the Rapid R11, R211, R311, and R54 staplers as well as other A11 Style staplers. These staples are ideal for roofing felt, housewrap and any...
These 3/8" (9mm) long Grip Rite GRA1138 A11 staples fit the Rapid R11, R211, R311, and R54 staplers as well as other A11 Style staplers. These staples are ideal for roofing felt, housewrap and any other material that requires minimum holding power. There are 5,000 staples in each box. Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or our vendor's warehouse. If we or our vendor are out of stock or do...
Hy-Tek 120M22H Hot Dipped Galvanized 2-1/4" x .120" Screw Shank Nails are Equivalent to Common Nail Loads Hy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and...
Hy-Tek 120M22H Hot Dipped Galvanized 2-1/4" x .120" Screw Shank Nails are Equivalent to Common Nail Loads Hy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and diaphragms; and for engineered connections of wood structural panels to wood framing. The top third of the nail length has a smooth shank. The bottom two-thirds has a helical screw shank. The nails are manufactured from SAE J403 low-carbon steel wire, grade 1015-1030. This Hot Dipped Galvanized nail...